Operation Manual

3M
™
Multimedia-Projektor MP8780 © 3M 1999
4
DEUTSCH
BEWAHREN SIE DIESE ANWEISUNGEN AUF
Die in diesem Handbuch enthaltenen Informationen helfen Ihnen beim Betrieb und bei der Wartung Ihres 3M MP8780
Multimedia-Projektors.
POSITION VON PRODUKT-SICHERHEITSAUFKLEBERN
Es werden auf oder im 8780 Projektor Sicherheitsaufkleber verwendet, um Sie auf Sachverhalte oder Elemente hinzuweisen, auf
die Sie achten sollten.
HIGH TEMPERATURE
MAY CAUSE BURNS.
REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED.
EXPLOSION
THE LAMP MAY EXPLODE WHILE IT IS LIT.
HANDLE THE LAMP CAREFULLY SO AS NOT TO DAMAGE IT.
CAUTION
ATTENTION
!
Important
This projection lamp contains mercury.
Consult your local hazardous waste
regulations and dispose of this lamp
in a proper manner.
DO NOT REMOVE SCREWS EXCEPT USER SERVICE SCREWS
HIGH TEMPERATURE
MAY CAUSE BURNS.
REPLACE THE LAMP UNIT ONLY AFTER IT HAS COOLED.
REPLACE WITH THE SAME LAMP UNIT.
HIGH VOLTAGE
MAY CAUSE AN ELECTRIC SHOCK AND ULTRAVIOLET. REPLACE
THE LAMP AFTER FIRST REMOVING THE POWER PLUG FROM
THE OUTLET. THIS COVER IS PROVIDED WITH AN INTERLOCK.
DON'T DEFEAT THIS INTERLOCK.
""
DO NOT BLOCK THE VENTILATION HOLES (SIDE AND UNDERNEATH)
OF THE UNIT. THIS MAY CAUSE A FAILURE.
LISTED
UL 1950
685Z
E73930
Visual Systems Division
Austin, TX 78726-9000
AC100-240V
6.5A-2.7A
50/60HZ
MADE IN JAPAN
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
LCD PROJECTOR
MOD NO. MP8780
DO NOT STARE DIRECTLY
INTO THE PROJECTION LENS.
WARNING