Datasheet

3M Scotch-Weld MC100 Cyanoacrylate Adhesive
__________________________________________________________________________________________
Page: 11 of 14
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations
Incinerate uncured product in a permitted waste incineration facility. Dispose of completely cured (or polymerised) material
in a permitted industrial waste facility. If no other disposal options are available, waste product that has been completely
cured or polymerised may be placed in a landfill properly designed for industrial waste. Empty drums/barrels/containers used
for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per
applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by
applicable waste regulations. Consult with the respective regulating authorities to determine the available treatment and
disposal facilities.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of
3M, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC - 2000/532/EC
and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional regulations are
complied with and always use a licensed waste contractor.
EU waste code (product as sold)
08 04 09* Waste adhesives and sealants containing organic solvents or other dangerous substances
20 01 27* Paint, inks, adhesives and resins containing dangerous substances
SECTION 14: Transportation information
GS-2000-4494-8, GS-2000-4674-5, GS-2000-4675-2, GS-2000-4676-0,
GS-2000-4677-8, GS-2000-4798-2, GS-2000-4935-0, GS-2000-4936-8,
GS-2000-4937-6, GS-2000-5281-8
ADR/RID: NOT RESTRICTED FOR ROAD (ADR/RID), (--).
IMDG-CODE: not restricted according to IMDG-Code, LIMITED QUANTITY.
ICAO/IATA: UN3334, AVIATION REGULATED LIQUID,N.O.S., (CYANOCRYLATE ESTER), 9..
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Carcinogenicity
Ingredient CAS Nbr Classification Regulation
Hydroquinone 123-31-9 Carc. 2 Regulation (EC) No.
1272/2008, Table 3.1
Hydroquinone 123-31-9 Carc.Cat.3 Regulation (EC) No.
1272/2008, Table 3.2
Hydroquinone 123-31-9 Gr. 3: Not classifiable International Agency
for Research on Cancer
Poly(methyl methacrylate) 9011-14-7 Gr. 3: Not classifiable International Agency
for Research on Cancer
Global inventory status
Contact 3M for more information. The components of this material are in compliance with the provisions of the Korean
Toxic Chemical Control Law. Certain restrictions may apply. Contact the selling division for additional information. The
components of this material are in compliance with the provisions of Australia National Industrial Chemical Notification and
Assessment Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information. The