Cut Sheet
Engineering Specification
Crimp-type connectors shall, electrically and
mechanically, connect permanently to the pre-
stripped ends of two stranded copper wires.
The connector line shall offer barrel variations in
wire (AWG or MCM) size (#2 to 250 MCM). The
connector line shall have regulatory agency coverage
(UL Listing). The connectors shall be marked with
the wire range and manufacturer’s symbol () and
catalog number.
The non-insulated, seamless butt connector shall be
tin-plated, annealed copper, having a double-length,
round seamless barrel, with a center stop, sized for
specified (AWG or MCM) wire range (2 AWG thru
250 MCM).
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
Litho in USA.
© 3M 2002 78-8125-9663-9-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
eriW
eziS
GWA
ro
MCM
noitalusnIeriW
htgneLpirtS
sehcnI
seiD&looTpmirC
TEAB&TydnruB
6045MBT3-92YM
elacS
gnitteS
eiD
roloC
eiD
tresnI
261/92nworBC
18/51neerGC
0/14/30/1kniPB
0/28/70/2kcalBB
0/361/510/3egnarOenon
0/41 0/4elpruPenon
0521 052elpruP----
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.