Pad Staff Workstation Model 895 Owner’s Manual 3M Library Systems 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 www.3M.
© 2006 3M. All rights reserved. 3M™ Pad Staff Workstation Model 895 Owner’s Manual 78-8129-2551-5_B 3M is a trademark of 3M.
Table of Contents SAFETY INFORMATION .................................................................. 1 Intended Use ................................................................................................................... 1 Label Locations .............................................................................................................. 3 EMC, USA, and Canada Compliance.............................................................................
SAFETY INFORMATION Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3M™ Pad Staff Workstation. Retain these instructions for future reference. Intended Use The 3M™ Pad Staff Workstation Model 895 is intended for use in checkin/check-out of library materials.
WARNING To reduce the risks associated with hazardous voltage contained within the power supply, which, if not avoided, could result in death or serious injury: Do not use the power supply if the case or cord are damaged; Do not use power supply in outdoor or wet environments; Do not attempt to service or repair the RFID circuitry or power supply—no user serviceable parts inside.
Label Locations Model 800 12 VDC 300 mA S/N: 800XXXX N1108 3M Library Systems St. Paul, Minnesota 55144 3M TM RFID Reader Model 895 12 VDC 0,3 A FCC ID: DGF-SSD895 I.T.E. .T.E. LISTED 4P24 Canada: __________ S/N: 895XXXX N1108 3M Library Systems St. Paul, Minnesota 55144 3 This device complies with part 15 of the FCC Rules.
EMC, USA, and Canada Compliance FCC Radio Frequency Rules and Regulations This equipment has been tested and found to comply with the limits for a Class A device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Overview Introduction The 3M™ Pad Staff Workstation Model 895 is used with a customer supplied computer and 3M software to read and/or program 3M™ ISO RFID Tags.
Equipment specifications RFID Reader Pad Dimensions Length: 11.4 in. (28.9 cm) Width: 11.4 in. (28.9 cm) Height: 0.4 in. (1.0 cm) Read range At least 10 in. (25.4 cm) with a book tag in the center of the RFID Reader Pad. Metal surfaces within 2 in. (5 cm) of the RFID Reader Pad will reduce the RFID Reader Pad’s read range. Weight 32 oz. (0.91 Kg) Environmental Typical ambient temperature range: 50° F to 104° F (10° C to 40° C) Humidity: 0% to 85% RH, non-condensing RFID Reader Dimensions Length: 5.
Requesting Service Before you call Before you call 3M Service, have the following information available: Have the RFID Reader Pad connected with power applied and near the telephone. Write down the RFID Reader Pad’s serial number (located on the bottom of the RFID Reader Pad). Be ready to describe the problem and any error messages in detail. 3M Service phone numbers For any questions regarding the Pad Staff Workstation, call one of the following telephone numbers.
