Specifications

3M™ MicroTouch™ Display M1700SS User Guide 20
Document #19-268 Rev AL
Supported Magnetic Stripe Readers
At the time of publication, the following “mini” magnetic card readers have been tested
to fit the 3M Touch Systems optional card reader bracket. Consult your card reader sales
representative for model numbers not listed here.
Table 2. Supported Mag Stripe Card Readers
ID Tech® MagTek®
all MiniMag™ readers all "mini" sized readers
IDT 3331-02U IDT 3321-33 2180201
IDT 3331-12U IDT 3321-33PP 2180202
IDT 3331-23U IDT 3331-02 2180203
IDT 3331-33U IDT 3331-12 2180204
IDT 3321-02 IDT 3331-23 2180205
IDT 3321-02PP IDT 3331-33 2180206
IDT 3321-12 IDT3301-02 21040103
IDT 3321-12PP IDT3301-12 21040104
IDT 3321-23 IDT3301-23
IDT 3321-23PP IDT3301-33
Connecting the Display
CAUTION
You are cautioned that any change or modification to the equipment not expressly
approved by the party responsible for compliance could void your authority to operate
such equipment.
The M1700SS Display comes with the cables already connected (with the exception of
the audio cable), however, there may be times when you need to reconnect these cables
for some reason. To connect the M1700SS Display:
1. Turn off your computer. You should always turn off the computer before connecting
or disconnecting any device.
Figure 11. Identifying Your Display Connections
2. Connect one end of the video cable to the video connector on the display. Connect
the other end to the video card in your computer.
Video Connection
Powe
r
Head
p
hone
Touch Senso
r
Line In