Specifications

3M™ MicroTouch™ Display M1700SS User Guide 17
Document #19-268 Rev AL
Figure 8. Adjusting the Viewing Angle
Lift up on the latch to release lock. Adjust the M1700SS
Display by pushing or pulling on the top front of the display
until the screen is at the best viewing angle for you. Then
push down on latch to engage locking mechanism and
stabilize display position.
Installing the Video Card and Video Driver
Before you can connect your display, make sure your computer has a video card and
driver already installed for the display. The video driver is supplied by the video card
manufacturer and may be found on the disks that came with your computer. If you need
information on installing a video card or video driver, refer to your computer
documentation for instructions.
Supported Video Display Modes and Refresh Rates
Your video card should support one of the display modes specified in Table 1. If you
select an unsupported video mode, the monitor may stop working or display
unsatisfactory picture quality.
Lift up latch to release lock and raise
or lower display to suit your needs.
Push down latch to engage lock
and stabilize display position.