Manualshelf

User's Manual

ManualsBrands3M ManualsElectronicsLibrary Materials Digital Identification System
11121314151617181920
15
Resetting the Smart Check System
The Smart Check system can only be reset when an error code screen is
displayed. The reset command resets the Smart Check software
1 Hold the Smart Check Reset
Card on the front conveyor belt
of the Smart Check system so
that one of the sensors is
blocked.
2 The Smart Check program is
reset.
ยง The System is resetting
message appears while the
software is resetting.
4 After a successful reset, the
main patron screen should
appear on the touch screen and
the system should be ready to
use.
SMC_SG_010
78-8123-9589-1