User's Manual

18
Starting the SelfCheck System
1 Turn ON the power switch on the back of the SelfCheck™ System.
2 Log in using your designated password if required. The
SelfCheck system program automatically starts.
Shutting down the SelfCheck System
Press **316# on the keyboard and wait for the screen message
indicating it's safe to turn the SelfCheck system off, then turn OFF
the power switch on the back of the SelfCheck system.
To shut down the SelfCheck system while the SelfCheck
program is NOT running, click on Shut Down in the
Windows™ Start menu.
Starting the SelfCheck™ Manager Software
Use the following steps to start the SelfCheck Manager software:
If the keyboard is not plugged into the SelfCheck system, start
at step 1. If the keyboard is already plugged in and the
SelfCheck system is running, start at step 6.
1 Press **316# to shut down the SelfCheck system.
2 Turn OFF the power switch on the back of the SelfCheck
system.
3 Open the right side panel on the SelfCheck system.
4 Plug the keyboard into the keyboard into the keyboard port.
5 Turn ON the power switch on the back of the SelfCheck system.
The SelfCheck program starts.
6 Press the Esc key on the keyboard after the SelfCheck program
starts. This shuts down the SelfCheck program.
7 Double click on the SelfCheck Manager icon on the Windows
desktop. This starts the SelfCheck Manager software.