3M™ LeadCheck™ Buffer Solution 06/25/18 Safety Data Sheet Copyright,2018,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ LeadCheck™ Buffer Solution 06/25/18 Hazard Statements Causes serious eye damage. Precautionary Statements General: Keep out of reach of children. Prevention: Wear eye/face protection. Response: IF IN EYES: Rinse cautiously with water for several minutes. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Remove contact lenses, if present and easy to do. 2% of the mixture consists of ingredients of unknown acute oral toxicity.
M™ LeadCheck™ Buffer Solution 06/25/18 SECTION 5: Fire-fighting measures 5.1. Suitable extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Carbon monoxide Carbon dioxide Condition During Combustion During Combustion 5.3.
3M™ LeadCheck™ Buffer Solution 06/25/18 8.2.1. Engineering controls Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. 8.2.2. Personal protective equipment (PPE) Eye/face protection Select and use eye/face protection to prevent contact based on the results of an exposure assessment.
3M™ LeadCheck™ Buffer Solution 06/25/18 10.3. Possibility of hazardous reactions Hazardous polymerization will not occur. 10.4. Conditions to avoid None known. 10.5. Incompatible materials None known. 10.6. Hazardous decomposition products Substance None known. Condition Refer to section 5.2 for hazardous decomposition products during combustion.
3M™ LeadCheck™ Buffer Solution 06/25/18 Skin Corrosion/Irritation For the component/components, either no data are currently available or the data are not sufficient for classification. Serious Eye Damage/Irritation Name Species Value TARTARIC ACID In vitro data Corrosive Skin Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification.
3M™ LeadCheck™ Buffer Solution 06/25/18 Incinerate in a permitted waste incineration facility. Proper destruction may require the use of additional fuel during incineration processes. As a disposal alternative, utilize an acceptable permitted waste disposal facility.
3M™ LeadCheck™ Buffer Solution HMIS Hazard Classification Health: 3 Flammability: 0 06/25/18 Physical Hazard: 0 Personal Protection: X - See PPE section. Hazardous Material Identification System (HMIS® IV) hazard ratings are designed to inform employees of chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations.
3M™ LeadCheck™ Indicator 02/03/22 Safety Data Sheet Copyright,2022, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ LeadCheck™ Indicator 02/03/22 SECTION 3: Composition/information on ingredients Ingredient Non-hazardous ingredients LEAD INDICATOR DYE C.A.S. No. Trade Secret* Trade Secret* % by Wt 93 - 96 4- 7 *The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret. SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: Wash with soap and water.
3M™ LeadCheck™ Indicator 02/03/22 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up Collect as much of the spilled material as possible. Use wet sweeping compound or water to avoid dusting. Sweep up. Place in a closed container approved for transportation by appropriate authorities. Clean up residue. Seal the container.
3M™ LeadCheck™ Indicator 02/03/22 Skin/hand protection No chemical protective gloves are required. Respiratory protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. SECTION 9: Physical and chemical properties 9.1.
3M™ LeadCheck™ Indicator 02/03/22 None known. Refer to section 5.2 for hazardous decomposition products during combustion. SECTION 11: Toxicological information The information below may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority.
3M™ LeadCheck™ Indicator 02/03/22 Respiratory Sensitization For the component/components, either no data are currently available or the data are not sufficient for classification.
3M™ LeadCheck™ Indicator 02/03/22 destruction may require the use of additional fuel during incineration processes. If no other disposal options are available, waste product may be placed in a landfill properly designed for industrial waste. EPA Hazardous Waste Number (RCRA): Not regulated SECTION 14: Transport Information For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501. SECTION 15: Regulatory information 15.1.
3M™ LeadCheck™ Indicator 02/03/22 the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. HMIS Hazard Classification Health: 0 Flammability: 1 Physical Hazard: 0 Personal Protection: X - See PPE section. Hazardous Material Identification System (HMIS® IV) hazard ratings are designed to inform employees of chemical hazards in the workplace.
3M™ LeadCheck™ Confirmation Card 07/24/18 Safety Data Sheet Copyright,2018,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ LeadCheck™ Confirmation Card 07/24/18 Precautionary Statements General: Keep out of reach of children. SECTION 3: Composition/information on ingredients Ingredient Lead Nitrate C.A.S. No. 10099-74-8 % by Wt 0.005 - 0.01 SECTION 4: First aid measures 4.1. Description of first aid measures Inhalation: No need for first aid is anticipated. Skin Contact: Wash with soap and water. If signs/symptoms develop, get medical attention. Eye Contact: Flush with large amounts of water. medical attention.
3M™ LeadCheck™ Confirmation Card 07/24/18 6.1. Personal precautions, protective equipment and emergency procedures For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Observe precautions from other sections. 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up Collect as much of the spilled material as possible.
3M™ LeadCheck™ Confirmation Card 07/24/18 pH Melting point Boiling Point Flash Point Evaporation rate Flammability (solid, gas) Flammable Limits(LEL) Flammable Limits(UEL) Vapor Pressure Vapor Density Density Specific Gravity Solubility in Water Solubility- non-water Partition coefficient: n-octanol/ water Autoignition temperature Decomposition temperature Viscosity Percent volatile Not Applicable Not Applicable Not Applicable No flash point Not Applicable Not Classified Not Applicable Not Applicable No
3M™ LeadCheck™ Confirmation Card 07/24/18 Signs and Symptoms of Exposure Based on test data and/or information on the components, this material may produce the following health effects: Inhalation: No known health effects. Skin Contact: Mechanical Skin irritation: Signs/symptoms may include abrasion, redness, pain, and itching. Eye Contact: Mechanical eye irritation: Signs/symptoms may include pain, redness, tearing and corneal abrasion. Ingestion: No known health effects.
3M™ LeadCheck™ Confirmation Card 07/24/18 For the component/components, either no data are currently available or the data are not sufficient for classification. Aspiration Hazard For the component/components, either no data are currently available or the data are not sufficient for classification. Please contact the address or phone number listed on the first page of the SDS for additional toxicological information on this material and/or its components.
3M™ LeadCheck™ Confirmation Card 07/24/18 LEAD COMPOUNDS LEAD COMPOUNDS None None Carcinogen Developmental Toxin 15.3. Chemical Inventories The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. 15.4. International Regulations Contact 3M for more information. This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
