User Guide

LINER SELECTION
40# SC
44# Polykraft
50# SC
50# SC Remoist
50# C2S
55# Laser
60# SC Remoist
60# SBK
78# CCK
80# TB
83# Laser
90# Polycoated
100# Printable
1.0 Polyester
1.5 Polyester
4.0 Polyester
2.4
3.1
3.1
3.1
3.1
3.6
3.4
3.4
4.6
5.8
5.9
7.0
7.0
1.0
1.5
4.0
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Semi-bleached, super calendered kraft sheet.
Polypropylene has been laminated to a 44# brown kraft sheet. Excellent
caliper control and strength making it ideal for high-speed labeling applications.
Semi-bleached, super calendered kraft sheet designed for high-speed
die-cutting and matrix stripping. Not recommended for sheet on press
applications.
Remoisturized after silicone coating to restabilize the sheet and reduce
side curl. Excellent for perforation and fanfold applications. Standard on
all computer-imprintable films and battery label products.
Back side has been lightly coated with silicone to reduce label pick.
Recommended when using very soft adhesives or where heavy adhesive
coat weights are required.
White stabilized, clay-coated, two-side kraft. Back side has a special surface
finish to enhance feed and reduce static problems. Ideal for copier and many
desktop laser applications.
Semi-bleached, super calendered kraft sheet. Excellent for perforation and
fanfold applications where additional stiffness is required.
Stabilized bleached kraft sheet with good caliper control. Ideal for most
sheet-on-press applications. Back side is printable.
Bleached, clay-coated kraft sheet. Excellent for sheet-on-press applications
where additional strength and stiffness is required.
Bleached kraft-coated with polyethylene on two sides and laminated with
white tissue on the back side. Recommended for high-speed laser sheet
applications. Not recommended for desktop lasers.
Stabilized bleached kraft. Less expensive alternative to our 80# TB for less
critical laser applications. Has special surface finish on the back side to
enhance feed and reduce static problems.
Bleached kraft sheet polyethylene-coated on two sides.
Bleached clay-coated, one-side sheet. Good dimensional stability and
caliper control.
Used when high strength and caliper control are important. Recommended
for high-speed labeling application or where clarity of the adhesive is critical.
Clear polyester. Used when high strength and caliper control are important.
Recommended for high-speed labeling applications or where clarity of the
adhesive is critical.
Clear polyester. Excellent for doming applications where ultimate lay flat
is required.
Ultimate
Lay Flat
Semi
Lay Flat
Back Side
Printable Fanfold Roll-to-RollLiner Mil Thickness Description
Note: The chart above is a general guide. Facestocks and adhesives should be tested with actual components to ensure acceptable performance.
This technical information and data should be considered representative or typical only and should not be used for specification purposes.