User Manual

HealthCare
Confidential
USER MANUAL
(HARDGOODS)
<<Object Name>>
<<Status>> Ver. <<Version>>
Rel. <<Release Date>>
Page 13 of 25
NOTE: The official document is electronic. Paper copies are uncontrolled.
To specify the preset (default) filter setting: Select the “SET FLTR” option in the Setup menu. Press and
release the (M) button to select the current filter as default. The factory default is the diaphragm filter.
To specify Backlighting duration: Select the “BACKLITE” option in the Setup menu. Use the (-) and (+) buttons
to scroll through the list of options. Press and release the (M) button to select. The factory default is “ON DMND”
(Backlight will illuminate for three seconds by depressing and releasing the power button). The “DISABLE” option
disables the backlight at all times and will conserve power. The “ALWAYS” option will illuminate the backlight at
all times at a reduced level while the stethoscope is powered on and not in standby mode.
To select Auto Off power management: Select the “AUTO OFF” option in the Setup menu. Use the (-) and (+)
buttons to scroll through the list of options. Press and release the (M) button to select. The factory default is
“ENABLE”.