User Guide

3M
™
Fastbond
™
Water-based Adhesives at a Glance
Contact Adhesives
Insulation and Carpet Adhesives
Overlap Shear Peel
Flash
Strength Strength
Solids Point
(PSI) (PIW)
Product/ Weight (Closed Application Bonding 75°F 180°F 75°F
Color Description (Approx.) Cup) Consistency Method Range (24°C) (82°C) (24°C) Packaging
30NF/ • Long bonding range with high 50% None Thin liquid Spray, Up to 480
(1)
60
(1)
5.9
(2)
Quart,
Green immediate bond strength roller, 4 hours gallon,
and • Economical high coverage brush 5-gallon pail,
neutral • Meets MIL-A-24179A, Type I drum, tote
30H/ • High viscosity version of 30NF 50% None Medium Spray, Up to 480
(1)
60
(1)
5.9
(2)
Drum, tote
Green for roll coating liquid roller, 4 hours
brush,
roll coat
2000NF/ • Water-dispersed, activated 49% None Thin liquid Co-Spray Up to 350
(1)
50
(1)
4.1
(2)
5-gallon box
Black, blue adhesive 2 hours and pail,
light orange, • Immediate bonding and handling drum, tote
and neutral strength without forced drying
100/ • One-part, fast setting with 47% None Very thin Spray Up to NA NA 1.1
(2)
5-gallon box
Lavender neoprene base liquid 20 and pail,
and • Bonds many porous substrates minutes drum, tote
neutral to porous or non-porous
substrates
Flash Peel
Solids Point Strength
Product/ Weight (Closed Application Bonding
(PIW)
Color Description (Approx.) Cup) Consistency Method Range
75°F (24°C) Packaging
Insulation • Fast tacking, high performance pressure 55% None Thin Spray, 30 days 3.0
(1)
5-gallon box
Adhesive sensitive adhesive for lightweight materials brush, plus and pail,
49/Clear • Low VOCs roller drum, tote
• UL component recognition
MAGW2 file MH 6288
Pressure • Permanently pressure sensitive with 40% None Thick Spray, 30 days 4.4
(1)
5-gallon pail,
Sensitive aggressive tack liquid
brush, roller, plus drum
Adhesive • Plasticizer resistant trowel,
4224NF/ • Low VOC content
coater
Blue and clear
(1) Primed polyester to steel @ 2.0 inches/minute separation rate.
Note: The technical information and data on these pages should be considered representative or typical only, and should not be used for specification purposes.
(1) Birch plywood to birch plywood @ 0.1 inches/minute separation rate. (2) Canvas to cold rolled steel @ 2.0 inches/minute separation rate.
Industrial and Transportation Business
Industrial Adhesives and Tapes Division
3M Center Bldg. 21-1W-10
900 Bush Ave.
St. Paul, MN 55144
1-800-362-3550
www.3M.com/adhesives
Printed in U.S.A.
© 2006 3M
78-9236-7133-9
PRODUCT USE: All statements, technical information and recommendations contained in this document are based upon tests or experience
that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a
particular application, including the conditions under which the product is used and the time and environmental conditions in which the
product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.
WARRANTY AND LIMITED REMEDY: 3M warrants that each 3M product meets the applicable specifications at the time 3M ships
the product. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A
COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user’s application. If the 3M product is defective, your exclusive remedy and 3M’s and seller’s sole
obligation will be, at 3M’s option, to repair or replace the product or refund the purchase price. LIMITATION OF LIABILITY: Except
where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect,
special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
Fastbond is a trademark of 3M Company.