3M™ Heat Shrink Tubing Product Selection Guide Protect your Connection
Shrink Temp. (Min.) Shrink Ratio Standard Sizes Expanded Diameter Dielectric Strength (V/mil) Volume Resistivity (ohm-cm) Tensile Strength (PSI) Flexible Polyolefin General purpose flame retardant insulation for UL, CSA and MIL-DTL-23053/5 applications; cable and component covering. Class 1 = opaque colors; Class 2 = clear.
Specific Gravity Corrosive Effect Abrasion Resistance Flexibility (see note below) Fuel & Oil Resistance Solvent Resistance Resistance To Acids and Alkalis 1.3 Self-Extinguish meets UL 224 All-Tubing Flame Test (except clear) Non-Corrosive Good 3 Good Exc. Exc. SAE-AMS-DTL-23053/5*, Class 1, 2; UL File E-39100; CSA LR38227; ABS 400 +1, –10 1.5 Self-Extinguish meets UL Non-Corrosive 224 VW-1 Test Good 3 Good Exc. Exc.
Technical information provided consists of typical product data and should not be used for specification purposes. Unless otherwise noted, all tests are performed at room temperature. 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed.
