Datasheet

3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A
__________________________________________________________________________________________
Page: 12 of 13
12.4. Mobility in soil
Please contact manufacturer for more details
12.5. Results of the PBT and vPvB assessment
This material does not contain any substances that are assessed to be a PBT or vPvB
12.6. Other adverse effects
No information available.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
See Section 11.1 Information on toxicological effects
Dispose of completely cured (or polymerized) material in a permitted industrial waste facility. As a disposal alternative,
incinerate uncured product in a permitted waste incineration facility. Proper destruction may require the use of additional fuel
during incineration processes. Empty drums/barrels/containers used for transporting and handling hazardous chemicals
(chemical substances/mixtures/preparations classified as Hazardous as per applicable regulations) shall be considered,
stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable waste regulations. Consult with the
respective regulating authorities to determine the available treatment and disposal facilities.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of
3M, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC - 2000/532/EC
and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional regulations are
complied with and always use a licensed waste contractor.
EU waste code (product as sold)
08 04 09*
Waste adhesives and sealants containing organic solvents or other dangerous substances
20 01 27*
Paint, inks, adhesives and resins containing dangerous substances
SECTION 14: Transportation information
ADR: UN2810; Toxic Liquid, Organic, N.O.S. (4,4-Methylenebis(2-Methylcyclohexylamine; 4-NONYL
PHENOL,BRANCHED); 6.1; III; (E); T1.
IATA: UN2810; Toxic Liquid, Organic, N.O.S. (4,4-Methylenebis(2-Methylcyclohexylamine; 4-NONYL
PHENOL,BRANCHED); 6.1; III.
IMDG: UN2810; Toxic Liquid, Organic, N.O.S. (4,4-Methylenebis(2-Methylcyclohexylamine; 4-NONYL
PHENOL,BRANCHED); 6.1; III; FA, SA.
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Global inventory status
Contact 3M for more information. The components of this material are in compliance with the provisions of the Korea
Chemical Control Act. Certain restrictions may apply. Contact the selling division for additional information. The
components of this material are in compliance with the provisions of Australia National Industrial Chemical Notification and
Assessment Scheme (NICNAS). Certain restrictions may apply. Contact the selling division for additional information. The
components of this material are in compliance with the provisions of Japan Chemical Substance Control Law. Certain
restrictions may apply. Contact the selling division for additional information. The components of this material are in
compliance with the provisions of Philippines RA 6969 requirements. Certain restrictions may apply. Contact the selling
division for additional information. The components of this product are in compliance with the chemical notification