Datasheet

3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B
__________________________________________________________________________________________
Page: 15 of 15
Risk management measures
Under the operational conditions described above the following risk management
measures apply:
General risk management measures:
Human health:
Wear chemically resistant gloves (tested to EN374) in combination with ‘basic’
employee training. Refer to Section 8 of the SDS for specific glove material.;
Environmental:
None needed;
Waste management measures
Do not apply industrial sludge to natural soils;
Prevent discharge of undissolved substance to or recover from wastewater;
Prevent leaks and prevent soil / water pollution caused by leaks;
Sludge should be incinerated, contained or reclaimed;
3. Prediction of exposure
Prediction of exposure
Human and environmental exposures are not expected to exceed the DNELs and
PNECs when the identified risk management measures are adopted.
DISCLAIMER: The information on this Safety Data Sheet is based on our experience and is correct to the best of our
knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use
(except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the
product in combination with other materials. For these reasons, it is important that customers carry out their own test to
satisfy themselves as to the suitability of the product for their own intended applications.
3M United Kingdom MSDSs are available at www.3M.com/uk