Datasheet
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B
__________________________________________________________________________________________
Page: 14 of 15
Annex
1. Title
Substance identification
4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN POLYMER (MW
unknown or <=700);
EC No. 500-033-5;
CAS Nbr 25068-38-6;
Exposure Scenario Name
Formulation
Lifecycle Stage
Use at industrial sites
Contributing activities
PROC 09 -Transfer of substance or mixture into small containers (dedicated
filling line, including weighing)
ERC 02 -Formulation into mixture
Processes, tasks and activities covered
Transfer of substances/mixtures into small containers e.g. tubes , bottles or small
reservoirs.
2. Operational conditions and risk management measures
Operating Conditions
Physical state:Liquid.
General operating conditions:
Duration of use: 8 hours/day;
Emission days per year: <= 225 days per year;
Risk management measures
Under the operational conditions described above the following risk management
measures apply:
General risk management measures:
Human health:
Wear chemically resistant gloves (tested to EN374) in combination with ‘basic’
employee training. Refer to Section 8 of the SDS for specific glove material.;
Environmental:
None needed;
Waste management measures
Do not apply industrial sludge to natural soils;
Prevent leaks and prevent soil / water pollution caused by leaks;
Sludge should be incinerated, contained or reclaimed;
3. Prediction of exposure
Prediction of exposure
Human and environmental exposures are not expected to exceed the DNELs and
PNECs when the identified risk management measures are adopted.
1. Title
Substance identification
4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN POLYMER (MW
unknown or <=700);
EC No. 500-033-5;
CAS Nbr 25068-38-6;
Exposure Scenario Name
Industrial Application of Adhesives
Lifecycle Stage
Use at industrial sites
Contributing activities
PROC 08a -Transfer of substance or mixture (charging and discharging) at non-
dedicated facilities
PROC 13 -Treatment of articles by dipping and pouring
ERC 05 -Use at industrial site leading to inclusion into/onto article
Processes, tasks and activities covered
Application of product with applicator gun. Transfers without dedicated controls,
including loading, filling, dumping, bagging.
2. Operational conditions and risk management measures
Operating Conditions
Physical state:Liquid.
General operating conditions:
Duration of use: 8 hours/day;
Emission days per year: 220 days/year;