3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear Safety Data Sheet Copyright, 2018, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear METHYLCYCLOHEXYLAMINE)), (4-NONYL PHENOL,BRANCHED), 6.1, III, IMDG-Code segregation code: NONE, LIMITED QUANTITY, EMS: FA,SA. ICAO/IATA: UN2810, TOXIC LIQUID, ORGANIC, N.O.S., (4,4-METHYLENEBIS(2METHYLCYCLOHEXYLAMINE)), (4-NONYL PHENOL,BRANCHED), 6.1, III. KIT LABEL 2.1. Classification of the substance or mixture CLP REGULATION (EC) No 1272/2008 CLASSIFICATION: Acute Toxicity, Category 3 - Acute Tox.
M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear P201 P280C Response: P305 + P351 + P338 P333 + P313 P308 + P313 Obtain special instructions before use. Wear protective gloves and protective clothing. IF IN EYES: Rinse cautiously with water for several minutes. present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B Safety Data Sheet Copyright, 2018, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B DANGER. Symbols: GHS07 (Exclamation mark) | GHS08 (Health Hazard) |GHS09 (Environment) | Pictograms Ingredients: Ingredient CAS Nbr 4,4'-ISOPROPYLIDENEDIPHENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) Benzene, ethenyl-, homopolymer (oligomeric) EC No. % by Wt 25068-38-6 500-033-5 90 - 9003-53-6 500-008-9 1- HAZARD STATEMENTS: H319 H315 H317 H360F Causes serious eye irritation. Causes skin irritation.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B Response: P333 + P313 P308 + P313 If skin irritation or rash occurs: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention. SUPPLEMENTAL INFORMATION Supplemental Precautionary Statements: Restricted to professional users. 5% of the mixture consists of components of unknown acute oral toxicity. Contains 5% of components with unknown hazards to the aquatic environment. 2.3. Other hazards None known.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1. Extinguishing media In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish. 5.2. Special hazards arising from the substance or mixture None inherent in this product. Hazardous Decomposition or By-Products Substance Aldehydes.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B agents (eg. chlorine, chromic acid etc.) Use personal protective equipment (eg. gloves, respirators…) as required. 7.2. Conditions for safe storage including any incompatibilities Store away from acids. Store away from oxidising agents. 7.3. Specific end use(s) See information in Section 7.1 and 7.2 for handling and storage recommendations. personal protection recommendations.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B POLYMER (MW unknown or <=700) 4,4'ISOPROPYLIDENEDIPH ENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) 4,4'ISOPROPYLIDENEDIPH ENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) 4,4'ISOPROPYLIDENEDIPH ENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) 4,4'ISOPROPYLIDENEDIPH ENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) 4,4'ISOPROPYLIDENEDIPH ENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) Freshwater sediments 0.5 mg/kg d.w.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective clothing. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B Molecular weight No data available. SECTION 10: Stability and reactivity 10.1 Reactivity This material may be reactive with certain agents under certain conditions - see the remaining headings in this section 10.2 Chemical stability Stable. 10.3 Possibility of hazardous reactions Hazardous polymerisation will not occur. 10.4 Conditions to avoid Heat is generated during cure.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B Gastrointestinal irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhoea. May cause additional health effects (see below). Additional Health Effects: Reproductive/Developmental Toxicity: Contains a chemical or chemicals which can cause birth defects or other reproductive harm.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test result Exposure Duration 2 generation 4,4'-ISOPROPYLIDENEDIPHENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) 4,4'-ISOPROPYLIDENEDIPHENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) 4,4'-ISOPROPYLIDENEDIPHENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) 4,4'-ISOPROPYLIDENEDIPHENOLEPICHLOROHYDRIN POLYMER (MW unknown or <=700) Benzene, eth
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B No product test data available.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B homopolymer (oligomeric) or insufficient for classification 12.4. Mobility in soil Please contact manufacturer for more details 12.5. Results of the PBT and vPvB assessment This material does not contain any substances that are assessed to be a PBT or vPvB 12.6. Other adverse effects No information available. SECTION 13: Disposal considerations 13.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B restrictions may apply. Contact the selling division for additional information. The components of this material are in compliance with the provisions of Philippines RA 6969 requirements. Certain restrictions may apply. Contact the selling division for additional information. The components of this product are in compliance with the new substance notification requirements of CEPA.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B Annex 1. Title Substance identification 4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN POLYMER (MW unknown or <=700); EC No.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part B Risk management measures Under the operational conditions described above the following risk management measures apply: General risk management measures: Human health: Wear chemically resistant gloves (tested to EN374) in combination with ‘basic’ employee training. Refer to Section 8 of the SDS for specific glove material.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A Safety Data Sheet Copyright, 2018, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilising 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A SIGNAL WORD DANGER. Symbols: GHS06 (Skull and crossbones) | GHS08 (Health Hazard) |GHS09 (Environment) | Pictograms Ingredients: Ingredient CAS Nbr 4-Nonylphenol, branched 2,2'-Dimethyl-4,4'-methylenebis(cyclohexylamine) Benzyl Alcohol 84852-15-3 6864-37-5 100-51-6 EC No. % by Wt 284-325-5 229-962-1 202-859-9 40 - 60 15 - 40 1 - 10 HAZARD STATEMENTS: H311 H302 H319 H315 H361fd Toxic in contact with skin. Harmful if swallowed.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A 10% of the mixture consists of components of unknown acute oral toxicity. 10% of the mixture consists of components of unknown acute dermal toxicity. Contains 10% of components with unknown hazards to the aquatic environment. Notes on labelling Test results indicate this material meets the classification criteria for eye and skin irritation, but not corrosion. 2.3. Other hazards None known.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A If swallowed Rinse mouth. If you feel unwell, get medical attention. 4.2. Most important symptoms and effects, both acute and delayed See Section 11.1 Information on toxicological effects 4.3. Indication of any immediate medical attention and special treatment required Not applicable SECTION 5: Fire-fighting measures 5.1.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A SECTION 7: Handling and storage 7.1. Precautions for safe handling For industrial or professional use only. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Avoid release to the environment. Wash contaminated clothing before reuse.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A Applicable Norms/Standards Use gloves tested to EN 374 Respiratory protection An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of a full respiratory protection program.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A 10.3 Possibility of hazardous reactions Hazardous polymerisation will not occur. 10.4 Conditions to avoid Heat is generated during cure. Do not cure a mass larger than 50 grams in a confined space to prevent a premature exothermic reaction with production of intense heat and smoke. 10.5 Incompatible materials Strong acids. Strong oxidising agents. 10.6 Hazardous decomposition products Substance None known. Condition Refer to section 5.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A Toxicological Data If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or the data are not sufficient for classification.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A Benzyl Alcohol Benzyl Alcohol In vivo In Vitro Not mutagenic Some positive data exist, but the data are not sufficient for classification Species Multiple animal species Value Not carcinogenic Carcinogenicity Name Benzyl Alcohol Route Ingestion Reproductive Toxicity Reproductive and/or Developmental Effects Name Route Value Species Test result 4-Nonylphenol, branched Ingestion Not classified for male reproduction Rat 4-Non
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A muscles | nervous system | respiratory system hematopoietic system 2,2'-Dimethyl-4,4'methylenebis(cyclohexyla mine) 2,2'-Dimethyl-4,4'methylenebis(cyclohexyla mine) Inhalation 2,2'-Dimethyl-4,4'methylenebis(cyclohexyla mine) 2,2'-Dimethyl-4,4'methylenebis(cyclohexyla mine) 2,2'-Dimethyl-4,4'methylenebis(cyclohexyla mine) 2,2'-Dimethyl-4,4'methylenebis(cyclohexyla mine) Benzyl Alcohol Inhalation endocrine system | liver | kidney and/o
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A 2,2'-Dimethyl-4,4'methylenebis(cyclohex ylamine) 2,2'-Dimethyl-4,4'methylenebis(cyclohex ylamine) 2,2'-Dimethyl-4,4'methylenebis(cyclohex ylamine) Benzyl Alcohol 6864-37-5 Water flea Experimental 48 hours EC50 4.6 mg/l 6864-37-5 Green Algae Experimental 72 hours NOEC 0.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A 12.4. Mobility in soil Please contact manufacturer for more details 12.5. Results of the PBT and vPvB assessment This material does not contain any substances that are assessed to be a PBT or vPvB 12.6. Other adverse effects No information available. SECTION 13: Disposal considerations 13.1 Waste treatment methods See Section 11.
3M™ Scotch-Weld™ Epoxy Potting Compound/Adhesive DP270 Clear, Part A requirements of TSCA. This product complies with Measures on Environmental Management of New Chemical Substances. All ingredients are listed on or exempt from on China IECSC inventory. 15.2. Chemical Safety Assessment A chemical safety assessment has not been carried out for this mixture.
