Digital Media System 800 Series Product Safety Guide Guía de la seguridad del producto Produktsicherheit Führer Guide de sécurité du produit ᘸ᱒⌚⪘ 닢뽎 뀎닊 集눺龢 Guida di sicurezza di prodotto July 2007 • 78-6970-9477-5-C • Copyright © 2007, 3M Company. All Rights Reserved.
M™ Digital Media System 800 Series Contents Contents Introduction Safety Information Intended Use: .................................................................................................................................................6 SAVE THESE INSTRUCTIONS ..................................................................................................................8 Trademarks ................................................................................................................
3M™ Digital Media System 800 Series Introduction Introduction Thank You for Choosing 3M ENGLISH Thank you for choosing 3M equipment. This product has been produced in accordance with 3M’s quality and safety standards to provide smooth and trouble free use in the years to come. For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your meetings, presentations, and training sessions. © 3M 2007. All Rights Reserved.
3M™ Digital Media System 800 Series Introduction ENGLISH Safety Information Please read, understand, and follow all safety information contained in these instructions prior to the use of the 3M™ Digital Media System 800 Series. Retain these instructions for future reference. Intended Use: The 3M™ Electronic Digital Media System 800 Series was designed, built and tested for use indoors, using 3M™ brand lamps, 3M™ brand wall mount hardware and nominal local voltages.
3M™ Digital Media System 800 Series Introduction D WARNING © 3M 2007. All Rights Reserved. 7 ENGLISH • To reduce the risk associated with hazardous voltage: - Do not remove any screws other than those specified in the lamp replacement instructions. - Always plug projector into a grounded outlet. - Do not use in wet environments. - Do not use in an outdoor environment. - Replace the power cord if damaged. - Do not attempt to service the projector other than performing routine lamp replacement.
3M™ Digital Media System 800 Series Introduction D CAUTION ENGLISH • To reduce the risk associated with pinch: - Use caution when latching or unlatching the variable position arm collar. • To reduce the risk associated with explosion, and/or chemicals from leaking battery: - Use only with battery type AA. - Orient the battery’s plus (+) and minus (-) terminals according to the markings found on the remote control. - Do not leave the battery in the remote for an extended period of time.
3M™ Digital Media System 800 Series Introduction REGULATORY NOTICES EEC STATEMENT • This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. • This machine was tested against the 73/23/EEC (European Economic Community) for LVD (Low Voltage Directive) and fulfills these requirements.
What's in the Box 3M™ Digital Media System 800 Series What's in the Box ENGLISH Shipping Contents The Digital Media System 800 is shipped with some of the necessary cables required for standard VCR, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. 1. Digital Media System 800 2. Remote Control (Two AA Batteries included) 3. Universal Power Cable (5m) 4.
3M™ Digital Media System 800 Series Product Description Product Description Machine Characteristics ENGLISH The Digital Media System 800 integrates metal halide lamp and Digital Light Processor (DLP) technology. It accepts input from computer and/or video sources and projects a super bright image. The Digital Media System 800 offers the following features: 1. One panel 0.7” DDR DMD projection system 2. Vikuiti™ Super Close Projection (SCP) technology 3. VGA/SVGA/XGA/SXGA/MAC/(UXGA) PC compatibility 4.
3M™ Digital Media System 800 Series Installation and System Setup Installation & System Setup ENGLISH Setting Up the Projector 1. Mount whiteboard/projection screen in desired location on wall if necessary. The top of the whiteboard/projecction screen should be at least 86" (2.18 m) from the floor. 86" (2.18 m) to floor 2.
3M™ Digital Media System 800 Series 5. Installation and System Setup Determine the appropriate anchor to use with your wall type. Install five anchors at the marked locations. Install, but do not tighten, five mounting screws. Masonry ENGLISH Hollow Wall Solid Wall/ Wall Stud 6. (Digital Media System 810 Only) Measure the thickness of the whiteboard/projection screen to determine the number of shims needed. Screen Thickness Number of Shims 0–1" (0–25 mm) 0 1–1.25" (25–32 mm) 1 1.25–1.
3M™ Digital Media System 800 Series Installation and System Setup ENGLISH 10. Attach the safety cable securely to the wall with an appropriate anchor. Attach safety cable securely to stud or solid wall. Cable should have no slack. Note: Fully extend safety cable and then secure to wall. If necessary, use tie wraps to minimize cable slack. 11. Slide the contol panel cable tab into the slot at the bottom left of the unit. Power Cable Control Panel Cable 12.
3M™ Digital Media System 800 Series Installation and System Setup 13. (Digital Media System 815 Only) Attach the Annotation Pod as shown on pages 8–9 of the Digital Media System 815 eBeam™ Software for Interactive Whiteboard Operator’s Guide. ENGLISH 14. Start up the projector by switching on the main power switch, then pressing the power button on the projector, the control panel or the remote. Main Power Switch 15. Adjust the projector arm length to achieve the desired image size.
3M™ Digital Media System 800 Series Maintenance Maintenance ENGLISH Replacing Projection Lamp 1 2 3 11 12 1 10 2 9 3 8 4 7 6 5 4 5 6 7 8 9 11 12 Hg www.lamprecycle.org 1-800-328-1371 10 16 © 3M 2007. All Rights Reserved.
3M™ Digital Media System 800 Series Maintenance Reset Lamp Hours ENGLISH Menu © 3M 2007. All Rights Reserved.
ENGLISH Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
