Cut Sheet
1 of 2 3
3M™ Comfort Grip Gloves
Product
Description
3M™ Comfort Grip Gloves offer a comfortable alternative to the traditional cotton and
leather work glove. The gloves are constructed from a nylon knit material which offers a
comfortable, breathable fit and are perfectly suited for applications where hand flexibility
and dexterity are needed. The nitrile rubber coated palm provides gripping ability in wet
or oily applications. The Comfort Grip Cut Resistant glove is an excellent choice for
applications when working with sharp tools or edges.
Data Sheet September 2013
Agency Approvals
& Self
Certifications
Standard Mechanical Risks Comfort Grip
General Use
Comfort Grip Cut
Resistant
ANSI 105-2011
1
Blade Cut Resistant Level 1 Level 3
EN 388 Abrasion Resistance Level 4 Level 4
Blade Cut Resistant Level 1 Level 5
Tear Resistant Level 2 Level 4
Puncture Resistance Level 2 Level 4
Test Methods:
1
ASTM F1790-05
Materials
Comfort Grip General Use Nitrile Foam / Nylon Fiber
Comfort Grip Cut Resistant Nitrile Foam/UHMWPE Glass/Nylon Fiber
Note: Gloves may contain ingredients known to be a possible cause of irritation
and/or allergic reaction in persons sensitive to such materials. Immediately seek
medical advice if an allergic reaction should occur.
Glove Sizing
It is important to order the right size to insure the best protection and most comfortable
fit. Sizes are determined by measuring the circumference of the hand with a tape
measure in inches just below the knuckles with the hand closed. These measurements
will not account for all possible variations in hand size.
Size #
8 9 10
Size
M L XL
Care Instructions
Gloves are hand and machine washable. Do not use chlorine or oxygen bleach. Hang
glove to dry in shaded area. Performance characteristics may degrade due to
laundering.