User Guide

Market: Metal Fabrication
Application Description: Carbon Steel Weld Removal and Blending
page 3
MFabcstweld.pdf
© 3M 2005 IBD5453
Industrial Business
Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55106
3M, Scotch-Brite, Stikit, and Cubitron are trademarks of 3M.
To request additional product information or to arrange for sales assistance, call 1-866-279-1235.
Address correspondence to: 3M Industrial Business Customer Response Center, Building
21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our fax number is 651-778-4244. In Canada,
phone: [phone]. In Puerto Rico, phone: [phone]. In Mexico, phone: [phone].
Always read and follow all safety information included with the product. Do not exceed maximum
operating RPM’s. Use guards provided with machine. Follow safety operation procedures posted
in work areas.
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for
individual products, 3M warrants that each 3M product meets the applicable specifications at
the time 3M ships the product. Individual products may have additional or different warranties
as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR ANY IMPLIED WARRANTYARISING OUT OFA COURSE OFDEALING,
CUSTOM OR USAGE OFTRADE. User is responsible for determining whether the 3M
product is fit for a particular purpose and suitable for user’s application. If the 3M product
is defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole
obligation will be, at 3M’s option, to replace the product or refund the purchase price.
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising
from the 3M product, whether direct, indirect, special, incidental, or consequential, regardless
of the legal theory asserted, including warranty, contract, negligence, or strict liability.
All statements, technical information and recommendations contained in this document are
based upon tests or experience that 3M believes are reliable. However, many factors beyond
3M’s control can affect the use and performance of a 3M product in a particular application,
including the conditions under which the product is used and the time and environmental
conditions in which the product is expected to perform. Since these factors are uniquely within
the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine
whether it is fit for a particular purpose and suitable for the user’s method of application.
ForAdditional Information
Safety Information
Product Use
Warranty and
Limited Remedy
Limitation of Liability
Step 3: Final Finish
To generate a finer finish and more randomized scratch pattern, after using a 751I Stikit disc on the rotary tool,
add a final step with the same grade of 751I on a random orbital sander. 751I contains 3M
™
Cubitron
™
Abrasive
Grain and is a long-lasting alternative to aluminum oxide discs. A 5" disc is recommended, and is available in
convenient disc rolls.
Tech Tip: When using a random orbital sander it is best to start the disc flat on the workpiece to avoid gouging.