3M™ SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 3M™ SLiC 530/533/733-2 Port-MSM 0.
1.0 Kit Contents Note: Visually inspect all components. If any component is missing or appears damaged, do not install. Call 3M customer service at 1-800-426-8688 for a replacement product. 1.1 1.2 Kit Contents SLiC 530/533/733-2 Port 0.61 Cable Entry Bracket 80-6113-2344-7 A. Cable Addition Bracket Assembly (1) B. Cap C. Multi-port Grommet (1) D. Hose Clamp (1) E. Pair Saver F. 3M™ Scotchlok™ Shield Bond Connector 4460 with LSM Clamp (2) G. 10-32 UNF Flange Nut (2) H. Lubricant (1) I.
.0 Cable Addition Bracket Assembly Installation 3.1 Remove screw on the 3M™ Scotchlok™ Shield Bond Connector 4464 and swing the plate to the side. If the shield connector is installed with rivets, do not perform this step. 3.2 Remove central strength member retainer. Unscrew and remove the central strength member retainer that is intended for use. If installed using rivets, do not perform this step. 3.
.0 Grommet Assembly Installation using the 3M™ Scotchlok™ 4460-D/FO-CSM For LBT 4.1 Please refer to instruction manual 78-00132695-4 3M Scotchlok Shield Bond Connector Assembly 4460-D/FO-CSM for LBT for installation instructions. 4.2 Assembly is now ready to place in the end seal of the closure or terminal. Refer to instruction manual document number 78-8135-4502-3 for end seal installation. 5.0 Grommet Assembly Installation using the 3M™ Scotchlok™ Shield Bond Connector 4460-D/FO 5.
6.3 Using the supplied hose clamp, secure cables to the cable addition bracket and cable management tray frame as shown. Tighten hose clamp between 25 to 30 in.-lbs. (2.9 to 3.5 kgf-m). 6.4 If a single cable entry is also employed through second endseal port, please refer to instruction manual number 78-8135-4502-3 for cable installation section 4.0.
3M, Scotch, Scotchlok and SLiC are trademarks of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
