Product Manual

Configuration
3M™ Wireless Communication System Model XT-1
Installation Manual
September 2012 – Revision 1.9 DRAFT
Page 41 of 68
On the base first station:
• Enter the base station configuration mode, see page 31.
• Change the value for 07 Global Settings > Number of
BaseStations at This Site to 2 .
• Press Enter to implement the change.
• On the first base station, stations, change the value for 07 Global
Settings > Lane Number of This Base Station to 1 .
On the second base station:
• Enter the base station configuration mode, see page 31.
• Change the value for 07 Global Settings > Number of Base
Stations at This Site to 2 .
• Press Enter to implement the change.
• On the second base station, stations, change the value for 07 Global
Settings > Lane Number of This Base Station to 2 .
Store is Now Closed Prompt
Perform the following procedure to enable or disable the automatic store closed
prompt to let customers know in your absence that the store is closed:
Note:
Make sure that you disable the automatic store closed prompt in stores that are
open 24 hours.
I. Enter the base station configuration mode, see page 31.
• Change the value for 07 Global Settings > ”Store is Now
Closed” Prompt? to Yes or No .
Pull Ahead Prompt
You can let customers know to pull ahead when they are at order point #2 in a
tandem drive thru when it is out-of-service.
Figure 19
Perform the following procedure on Base #2 to enable or disable the automatic
pull ahead for Order Point #2:
• Enter the base station user service mode, see page 31.
• Change the value for 07 Global Settings > ”Pull Ahead”
Prompt (Tandem Only)? to Yes or No .
Pick Up
Cash
Order
Point #2
Order
Point
#1