Product Manual

Configuration
September 2012 – Revision 1.9 DRAFT
Page 34 of 68
3M™ Wireless Communication System Model XT-1
Installation Manual
Setting If Peer-to-Peer If Private Network
IP Address Base Station 192.168.99.2 192.168.0.110
(or another unused address in the same address
space as the DHCP address)
PC 192.168.99.1 DHCP
Subnet mask Base Station 255.255.255.0 255.255.255.0
PC 255.255.255.0 No requirement
Default gateway Base Station 192.168.99.1 192.168.0.1
(or the switch, router, or hub address)
PC Leave blank 192.168.0.1
(or the switch, router, or hub address)
E-mail server: 192.28.32.161
Your E-mail address suffix: mmm.com
Logging into the Base Station with a PC
Once the base station is connected and configured you can log into it from any
other computer on the network and operate the station as you would from the
local interface.
To log into the base station:
• Using a web browser, type in the IP address of the base station in the
browser’s Address bar, then press Enter.
• Type in your user name and password, then press Enter.
• The default user name is “User1”; the default password is
“1234”.
• Do NOT type the space between User and the user number (e.g.,
type “User5” instead of “User 5”).
• If the password has been changed, you can log in using the base
station to find out what it is ( 13 Change Passcodes >
Change User Passcodes , then look at the current code).
Change Basic Volume Settings
Note:
All volume settings should be adjusted during normal or peak business hours.
Adjusting them during slow times will likely produce volume settings that are
too low.
Note:
Inbound and outbound are always defined from the perspective of the headset.
Inbound Microphone Volume
Changing the inbound microphone volume affects the sound volume coming
from the customer order point microphone.
To turn up or down the inbound microphone:
• Enter the configuration mode, see page 31.
• Select a new value for 01 Drivethru Volume > Inbound Mic
Volume . The range is 0 (silent) to 20 (maximum).