Manualshelf

Product Manual

ManualsBrands3M ManualsAudio EquipmentXT-1H Wireless Communications System - Headset
21222324252627282930
Installation
September 2012 – Revision 1.9 DRAFT
Page 30 of 68
3M™ Wireless Communication System Model XT-1
Installation Manual
Power Up
After installation is complete, you can power up the system by plugging in the
base station transformer.
Run Mode Menu
When the system is powered up and functioning normally, the Run mode menu
appears on the display. Figure 18 shows the Run mode menu.
Figure 18
Navigating in the Base Station in Run Mode
To navigate the base station in Run mode you only need to use Enter, Mode, and
the directional arrow buttons: up , down , left ⊳, and right . The
remaining buttons function only in manager or installer configuration modes.
13:25 WED,NOV/16/2005
|
MODE< ML/PTT >
NOISE REDUCTION [LOW]
|
LANE 2 <SPLIT>
GREETER PLAYING MSG 1
|
VOLUME < DAY >