User's Manual

Configuration
3M™ Wireless Communication System Model XT-1
Installation Manual
September 2012 – Revision 1.9 DRAFT
Page 39 of 66
Text and Audio Prompts Language
Y
ou can choose between English, Spanish, German, and French language for all
text and audio prompts, which is essentially all of the factory prerecorded
information coming from the base station and all of the printed text on the
display.
Note:
Changing the text and audio prompt language will also change the language of
the headset messages.
Perform the following procedure to change the text and audio prompts:
• Enter the base station configuration mode, see page 30.
• Change the value for 07 Global Settings > Text & Audio
Prompts Language to English, Español, Deutsch, or Francais.
Drive Thru Audio Duplex Mode
The system can function using half duplex or full duplex modes. Choosing
between the two modes is based upon the desired operation.
Note:
In half duplex installations, all latching order taking modes and hands free
mode are disabled.
Perform the following procedure to change the drive through audio mode:
• Enter the base station configuration mode, see page 30.
• Change the value for 07 Global Settings > DriveThru Audio
Duplex Mode to Full or Half.
• In half-duplex systems, when the order taker is speaking, it is
impossible to hear any speech coming from the customer order
point.
• In full-duplex systems, the order taker can speak and hear speech
coming from the customer order point at the same time.
Page Channel Heard by Order Taker
You can enable or disable the order taker from being able to hear any paging
while speaking to a customer over the customer order point. This may prevent
interference with the order taking process.
Perform the following procedure to enable or disable the order taker hearing
pages while talking:
• Enter the base station configuration mode, see page 30.
• Select 07 Global Settings.
• To enable or disable the monitor playing the outbound talk, change the
value for PAGE Channel Heard by Order Taker: to NO or YES.
Number of Base Stations at this Site
When there are two base stations used together (tandem, dual, or side-by-side
drive thrus) they must be configured to work together.
Perform the following procedure to enable the two stations to work together: