Installation Manual

Appendix: Base Station Specifications
3M™ Drive-Thru Systems G5 Basestation Model G5B1
Installation Manual
April 24 2015 – Revision 1.0
Page 65 of 76
Appendix: Base Station Specifications
Physical
Parameter Specification or Requirement
Dimensions (l x w x d) 20 in. x 11½ in. x 2 in.
(51 cm x 29 cm x 5 cm)
Electrical
Parameter Specification or Requirement
Input Power 120 VAC, 50/60 Hz, 15A
Standard 3-prong outlet required
(station includes AC adapter)
Radio Frequency 2401.92 MHz - 2479.68 MHz ISM
Maximum output power (EIRP) 20 dBm
Speaker outputs 5W
Functional
Antennas
Magnetic Loop Detectors
Parameter Specification or Requirement
Maximum number of order points
per base station
2
Maximum number of headsets per
base station
more than 20
Maximum number of vehicle
detectors per base station
2
Greeter functionality Built-in
Operating Temperature Range 41°F (5°C) to 122°F (5 0°C)
This radio transmitter G5 Basestation Model G5B1 has been approved by Industry Canada and FCC to
operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not
included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
The following antenna types have been tested and approved for use with the Base Station
Model:RUB09A-2400-SMA, 1/2 wave, Monopole Antenna, Gain 0dBi
Model: HG2408P, Round Patch Antenna, Gain 8dBi
Model: HGV-2409U, Omni directional Antenna, Gain 8dBi
Important Note: Base Station may only be used with antennas that have been tested and approved for use
with this Base Station
This radio transmitter G5 Basestation Model G5B1 has been approved to operate with the magnetic loop
detectors listed below. These are optional loop detectors, limit 2. The frequency range is 50 -75 kHz. The
loop are should not exceed 0.63 m
2
(6.75ft
2
).