Installation Manual

Configuration
April 24 2015 – Revision 1.0
Page 46 of 76
3M™ Drive-Thru Systems G5 Basestation Model G5B1
Installation Manual
• Change the value for 07 Global Settings > DriveThru Audio
Duplex Mode to Full or Half .
• In half-duplex systems, when the order taker is speaking, it is
impossible to hear any speech coming from the customer order
point.
• In full-duplex systems, the order taker can speak and hear speech
coming from the customer order point at the same time.
Page Channel Heard by Order Taker
You can enable or disable the order taker from being able to hear any paging
while speaking to a customer over the customer order point. This may prevent
interference with the order taking process.
Perform the following procedure to enable or disable the order taker hearing
pages while talking:
• Enter the base station configuration mode, see page 34.
• Select 07 Global Settings .
• To enable or disable the monitor playing the outbound talk, change the
value for PAGE Channel Heard by Order Taker: to NO or YES .
Store is Now Closed Prompt
Perform the following procedure to enable or disable the automatic store closed
prompt to let customers know in your absence that the store is closed:
Note:
Make sure that you disable the automatic store closed prompt in stores that are
open 24 hours.
I. Enter the base station configuration mode, see page 34.
• Change the value for 07 Global Settings > ’’Store is Now
Closed’’ Prompt? to Yes or No .
Pull Ahead Prompt
You can let customers know to pull ahead when they are at order point #2 in a
tandem drive thru when it is out-of-service.
Figure 17
Pick Up
Cash
Order
Point #2
Order
Point
#1