Installation Manual

Configuration
3M™ Drive-Thru Systems G5 Basestation Model G5B1
Installation Manual
April 24 2015 – Revision 1.0
Page 45 of 76
• Make a new selection for 05 Noise Reduction > Acoustic Echo
Canceller . Options are Min , Low , Med , and Max . You may need to
experiment for a setting that works best for your ambient noise
environment and staff.
Set System Date and Time
Perform the following procedure to set the system time and date.
• Enter the base station configuration mode, see page 34.
• Change the date and time values for 06 Set Time & Date in the
Time and Date fields as required. Use the arrows to scroll from one
field to the next and type new values over the existing data in the
formats shown in parentheses:
• HH = Hours (01 to 24, e.g., 6:00 pm is 18)
• MM = Minutes (01 to 60)
• SS = Seconds (01 to 60)
• MMM = Month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct,
Nov, or Dec)
• DD = day (01 to 31)
• Year = Last two digits of the year (00 to 99, 20 is fixed and
cannot be changed)
Change Global Settings
Global settings are an assortment of options that you must choose based upon
the basic configuration of your system.
Text and Audio Prompts Language
You can choose between English, Spanish, German, and French language for all
text and audio prompts, which is essentially all of the factory prerecorded
information coming from the base station and all of the printed text on the
display.
Note:
Changing the text and audio prompt language will also change the language of
the headset messages.
Perform the following procedure to change the text and audio prompts:
• Enter the base station configuration mode, see page 34.
• Change the value for 07 Global Settings > Text & Audio
Prompts Language to English , Español , Deutsch , or Francais .
Drive Thru Audio Duplex Mode
The system can function using half duplex or full duplex modes. Choosing
between the two modes is based upon the desired operation.
Note:
In half duplex installations, all latching order taking modes and hands free
mode are disabled.
Perform the following procedure to change the drive through audio mode:
• Enter the base station configuration mode, see page 34.