Installation Manual

Installation
April 24 2015 – Revision 1.0
Page 26 of 76
3M™ Drive-Thru Systems G5 Basestation Model G5B1
Installation Manual
Figure 8
Figure 9 and Figure 9 and Figure 9 shows the wiring configuration between a
base station and the components of a dual lane drive thru. If the installation is
for a single lane operation, refer to Lane1 wiring in the illustration above
Note:
Vehicle Detector 1 (D1_12V, D1_GND and D1_DET) must always be used
for Lane 1 base station operation and Vehicle Detector 2 (D2_12V, D2_GND
and D2_DET) must always be used for Lane 2 base station