Datasheet

Description
The 3M™ 9900 Speciality Series Respirators have been developed
for particular working environments. The 9900 Speciality Series
Respirators provide e ective respiratory protection against
exposure to dust particles and/or non-volatile liquid particles as
well as o ering relief from nuisance odours. They can be used for a
wide range of applications from welding to waste sorting.
Tested and CE Approved to EN 149:2001+A1:2009•
Carbon layer provides protection against nuisance levels certain •
gases/vapours (below TLV).
Traditional convex shape, with nose clip and twin strap design. •
Durable, collapse resistant inner shell•
R e l i a b l e , e  ective protection against fi ne particles.•
3M™ Advanced Electret Filter Material gives e ective fi ltration •
with low breathing resistance for consistent high quality
performance
3M™ Cool Flow™ exhalation valve o ers improved comfort in •
hot humid environments and/or where work is hard and physical*.
Coloured headbands for easy identifi cation: yellow for FFP1 and •
blue for FFP2
Materials
The following materials are used in the production of the
9900 Speciality Series Respirators:
Straps • Polyester / Polyisoprene
Staples • Steel
Nose Foam • Polyurethance
Nose Clip • Aluminium
Filter • Polyester / Polypropylene / Carbon
Valve* • Polypropylene
Valve diaphragm* • Polyisoprene
These products do not contain components made from natural
rubber latex.
Maximum mass of products:
• Unvalved (9906, 9913, 9915 & 9921) = 13g
• Valved (9914 & 9926) = 18g
Standards
These products meet the requirements of recently amended
European Standard EN149:2001 + A1:2009, fi ltering facepiece
respirators for use against particles. They should be used to protect
the wearer from solid and non-volatile liquid particles only.
Products are classifi ed by fi ltering e ciency and maximum total
inward leakage performance (FFP1, FFP2 and FFP3), also by
usability and clogging resistance.
Performance tests in this standard include fi lter penetration; extended
exposure (loading) test; fl ammability; breathing resistance and total
inward leakage. Reusable products are also subjected to cleaning,
storage and mandatory clogging resistance tests (clogging is optional
for non reusable products). A full copy of EN 149:2001+A1:2009 can
be purchased from your national standards body.
Designations:
R = Reusable
NR = Non reusable (single shift use only)
D = Meets the clogging resistance requirements
Approvals
These products meet the requirements of the European Community
Directive 89/686/EEC (Personal Protective Equipment Directive) and
are thus CE marked.
Certifi cation under Article 10, EC Type-Examination and Article 11, EC
quality control, has been issued for these products by BSI Product
Services, Maylands Avenue, Hemel Hemp stead, HP2 4SQ, UK (Notifi ed
Body number 0086)
Applications
These respirators are suitable for use in concentrations of solid and
non-volatile liquid particles up to the following limits:
Model EN 149+A1
Classifi cation
Exhalation
Valve
Threshold Limit
Value, TLV
Gas & Vapour
99 06 FFP 1 NR D Unv alved 4 Hydrogen Fluoride (< TLV)
9913 FFP1 NR D Unv alved 4 Organic Vapours (< TLV)
9914 FFP1 NR D Valved 4 Organic Vapours (< TLV)
9915 FFP1 NR D Unv alved 4 Acid Gas (< TLV)
9921 FFP2 NR D Unv alved 12 Acid Gas (< TLV)
9926 FFP2 NR D Valved 12 Acid Gas (< TLV)
Respiratory protection is only e ective if it is correctly selected, fi tted and
worn throughout the time when the wearer is exposed to hazards.
3M
™
9900 Speciality Series Respirators
9906, 9913, 9914, 9915, 9921, 9926
* 9914 & 9926 models only.
Technical
Datasheet