SDS

3M™ Hi-Strength Spray Adhesive 90 02/26/16
__________________________________________________________________________________________
Page 6 of 12
Vapor Density
2.97 [Ref Std: AIR=1]
Density
0.726 g/ml
Specific Gravity
0.726 [Ref Std: WATER=1]
Solubility in Water
Nil
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
Not Applicable
Viscosity
Not Applicable
Average particle size
No Data Available
Bulk density
No Data Available
Hazardous Air Pollutants
0 % weight [Test Method: Calculated]
Molecular weight
No Data Available
Volatile Organic Compounds
<=55 % [Test Method: calculated per CARB title 2]
Percent volatile
<=75 % weight
Softening point
No Data Available
VOC Less H2O & Exempt Solvents
398 g/l [Test Method: calculated SCAQMD rule 443.1]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
Heat
10.5. Incompatible materials
Strong oxidizing agents
Strong acids
10.6. Hazardous decomposition products
Substance Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure