MSDS

ManualsBrands3M ManualsPaint17.6 oz. Hi-Strength 90 Spray Adhesive

MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 04/10/09

_________________________________________________________________________________________________

Page 1 of 8

Material Safety Data Sheet

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME:

3M(TM) Hi-Strength Spray Adhesive 90 (aerosol)

MANUFACTURER:

DIVISION:

Construction and Home Improvement Markets

ADDRESS:

3M Center

St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

04/10/09

Supercedes Date:

04/06/09

Document Group:

22-4028-1

Product Use:

Intended Use: Adhesive aerosol

Specific Use: hi-strength aerosol adhesive

SECTION 2: INGREDIENTS

Ingredient C.A.S. No. % by Wt

DIMETHYL ETHER 115-10-6 35 - 45

METHYL ACETATE 79-20-9 25 - 35

Non-volatile NJ Trade Secret # 04499600-6448P Trade Secret 10 - 20

CYCLOHEXANE 110-82-7 7 - 13

1,1-DIFLUOROETHANE 75-37-6 1 - 5

PENTANE 109-66-0 1 - 5

METHYL ALCOHOL 67-56-1 < 0.35

SECTION 3: HAZARDS IDENTIFICATION

3.1 EMERGENCY OVERVIEW

Specific Physical Form: Aerosol

Odor, Color, Grade: clear, sweet fruity odor

General Physical Form: Gas

Immediate health, physical, and environmental hazards: Aerosol container contains flammable gas under pressure. Closed

Summary of content (8 pages)

PAGE 2
MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 04/10/09 containers exposed to heat from fire may build pressure and explode. Extremely flammable liquid and vapor. Vapors may travel long distances along the ground or floor to an ignition source and flash back. Aerosol container contains flammable material under pressure. May cause target organ effects. Contains a chemical or chemicals which can cause birth defects or other reproductive harm. 3.
PAGE 3
MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 04/10/09 Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical attention. Wash contaminated clothing and clean shoes before reuse. Inhalation: Remove person to fresh air. Get immediate medical attention. If Swallowed: Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water.
PAGE 4
MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 04/10/09 sparks, open flame, pilot lights and other sources of ignition. Do not pierce or burn container, even after use. No smoking while handling this material. Do not spray near flames or sources of ignition. Aerosol container contains flammable gas under pressure. Avoid eye contact with vapors, mists, or spray. Keep out of the reach of children. Vapors may ignite explosively. May cause flash fire.
PAGE 5
MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) METHYL ACETATE METHYL ALCOHOL METHYL ALCOHOL METHYL ALCOHOL METHYL ALCOHOL PENTANE PENTANE PENTANE PENTANE SILICATES (LESS THAN 1% CRYSTALLINE SILICA) TALC CONTAINING ASBESTOS SILICATES (LESS THAN 1% CRYSTALLINE SILICA) TALC CONTAINING ASBESTOS 04/10/09 OSHA ACGIH ACGIH OSHA OSHA ACGIH OSHA OSHA OSHA OSHA STEL TWA STEL TWA STEL TWA TWA, Vacated STEL, Vacated TWA TWA, as total dust 250 ppm 200 ppm 250 ppm 200 ppm 250 ppm 600 ppm 6
PAGE 6
MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 04/10/09 SECTION 10: STABILITY AND REACTIVITY Stability: Stable. Materials and Conditions to Avoid: Heat Hazardous Polymerization: Hazardous polymerization will not occur.
PAGE 7
MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 04/10/09 ID Number(s): 70-0050-0054-5, 70-0050-2398-4, 70-0050-2400-8, 70-0050-2401-6, 70-0050-2407-3, 70-0714-1657-5, 70-0714-2446-2, 70-07147602-5, 70-0714-8005-0, 70-0714-9161-0 Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material. SECTION 15: REGULATORY INFORMATION US FEDERAL REGULATIONS Contact 3M for more information.
PAGE 8
MATERIAL SAFETY DATA SHEET 3M(TM) Hi-Strength Spray Adhesive 90 (aerosol) 04/10/09 INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.