Datasheet

Datasheet
Technical
Description
The 3M™ 8825 and 8835 Particulate Respirators provide
eective respiratory protection for use in industries where
workers will be exposed to dust particles and/or non-volatile liquid
particles.
• Tested and CE Approved to EN 149:2001+A1:2009
• Soft inner face-seal ring improves face seal, wearer comfort
and allows for hygienic cleaning if used for longer than one
shift (use3M™ 105 Face Seal Cleaner).
• Robust shell and cup design provides multi-shift capability and
a securer feel.
• 4 point adjustable braided headbands help achieve a more
secure feel and provide comfort to face, head and neck
• 3M™ Advanced Electret Filter Material gives effective filtration
with low breathing resistance for consistent high quality
performance.
• 3M™ Cool Flow™ exhalation valve oers improved comfort
in hot humid environments and/or where work is hard
andphysical.
• Coloured valve print for easy identification: blue for FFP2 and
red for FFP3
Approvals
This product meets the requirements of the European Community
Directive 89/686/EEC (Personal Protective Equipment Directive)
and are thus CE marked. Certification under Article 10, EC
Type-Examination, has been issued for these products by
INSPEC International Limited, 56 Leslie Hough Way, Salford,
Greater Manchester M6 6AJ, UK (Notified Body number 0194).
Certification under Article 11, EC quality control, has been issued
by BSI Product Services (Notified Body number 0086).
Standards
These products meet the requirements of recently amended
European Standard EN 149:2001 + A1:2009, filtering facepiece
respirators for use against particles. They should be used to
protect the wearer from solid and non-volatile liquid particles only.
Products are classified by filtering efficiency and maximum total
inward leakage performance (FFP1, FFP2 and FFP3), also by
usability and clogging resistance.
Performance tests in this standard include filter penetration;
extended exposure (loading) test; flammability; breathing
resistance and total inward leakage. Reusable products are also
subjected to cleaning, storage and mandatory clogging resistance
tests (clogging is optional for non reusable products). A full copy
of EN 149:2001+A1:2009 can be purchased from your national
standards body.
Designations:
R = Reusable
NR = Non reusable (single shift use only)
D = Meets the clogging resistance requirements
Applications
These respirators are suitable for use in concentrations of solid
and non-volatile liquid particles up to the following limits:
Model EN 149+A1
Classification
Exhalation
Valve
Threshold Limit
Value, TLV
8825 FFP2 R D Valved 12
8835 FFP3 R D Valved 50
Respiratory protection is only effective if it is correctly selected,
fitted and worn throughout the time when the wearer is exposed
to hazards.
3M
™
8825 and 8835
Particulate Respirators