Specification Sheet

ManualsBrands3M ManualsOxygen Equipment8214

Time Use Limitation

Replace the respirator when it becomes dirty,

damaged, or difficult to breathe through. If used

for ozone protection, replace respirator after 8

hours of use for ozone, or earlier if smell, taste or

irritation from contaminants is detected.

Shelf Life and Storage

• 3 years from the date of manufacture

• Use By date on box in MM/YYYY format

• Store respirators in the original packaging,

away from contaminated areas, dust,

sunlight, extreme temperatures, excessive

moisture, and damaging chemicals

• Store in temperatures between -4°F

(-20°C) and +86°F (+30°C) and not

exceeding 80% RH

WARNING!

This respirator helps reduce exposures to certain

airborne contaminants. Before use, the wearer

must read and understand the

User Instructions

provided as a part of the product packaging.

Follow all local regulations. In the U.S., a written

respiratory protection program must be

implemented meeting all the requirements of

OSHA 1910.134, including training, fit testing and

medical evaluation. In Canada, CSA standard

Z94.4 requirements must be met and/or

requirements of the applicable jurisdiction, as

appropriate. Misuse may result in sickness or

death. For correct use, consult supervisor and the

User Instructions,

or call 3M PSD Technical

Service in USA at 1-800-243-4630 and in

Canada at 1-800-267-4414.

Acceptable Fit Test Protocols

*Refer to OSHA 1910.134

Fit Test Protocol*

Acceptable with this

product?

Qualitative

Protocols

Saccharin ☒

BitrexTM

☒

Irritant

Smoke

☐

Isoamyl

Acetate

☐

Quantitative Protocols ☒

Personal Safety Division

3M Center, Building 0235-2W-70

St. Paul, MN 55144-1000

3M.com/workersafety

3M PSD products are occupational use only.

For More Information

Technical Assistance 1-800-243-4630

Hours of Operation: M-Th 8am - 6pm, Fri 8am - 4:30 pm CST