MSDS

ManualsBrands3M ManualsConnectorsInline Resin Power Cable Splice Kit, 10-2 AWG

MATERIAL SAFETY DATA SHEET 82-A SERIES INLINE RESIN SPLICING KIT 02/03/2009

_________________________________________________________________________________________________________

Page 1 of 2

Material Safety Data Sheet

utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is

obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit

thereon.

PRODUCT NAME:

82-A SERIES INLINE RESIN SPLICING KIT

MANUFACTURER:

DIVISION:

Electrical Markets Division

ADDRESS:

3M Center

St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date:

02/03/2009

Supercedes Date:

02/03/2009

Document Group:

08-4951-3

ID Number(s):

80-6109-8155-9, 80-6109-8156-7, 80-6109-8157-5, 80-6109-8158-3

This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for

each of these components is included. Please do not separate the component MSDSs from this cover page. The document

numbers of the MSDSs for components of this product are:

24-9848-3, 24-9869-9

Revision Changes:

Kit: ID Number(s) was modified.

DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M

MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF

TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of

use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely

within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a

particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may

have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.

Summary of content (17 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET 82-A SERIES INLINE RESIN SPLICING KIT 02/03/2009 Material Safety Data Sheet Copyright, 2009, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 2
MATERIAL SAFETY DATA SHEET 82-A SERIES INLINE RESIN SPLICING KIT 02/03/2009 In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
PAGE 3
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART A 04/07/11 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 4
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART A 04/07/11 Skin Contact: Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching. Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Inhalation: This product may have a characteristic odor; however, no adverse health effects are anticipated.
PAGE 5
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART A 04/07/11 Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition source and could cause flammable gases or vapors in the spill area to burn or explode. 6.2.
PAGE 6
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART A 04/07/11 8.2.4 Prevention of Swallowing Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. 8.
PAGE 7
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART A 04/07/11 SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Cure (harden, set, or react) the product according to product instructions.
PAGE 8
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART A 04/07/11 Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
PAGE 9
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART A 04/07/11 Section 1: Address was added. Copyright was added. Company logo was added. Section 6: Clean-up methods heading was added. Telephone header was added. Company Telephone was added. Section 1: Emergency phone information was added. Section 1: Emergency phone information was deleted. Company Logo was deleted. Copyright was deleted. Section 3: Immediate physical hazard(s) was deleted. Section 6: Release measures information was deleted.
PAGE 10
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 Material Safety Data Sheet Copyright, 2012, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
PAGE 11
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 Odor, Color, Grade: Smooth, black liquid with amine odor General Physical Form: Liquid Immediate health, physical, and environmental hazards: Vapors may travel long distances along the ground or floor to an ignition source and flash back. May cause chemical eye burns. May cause allergic skin reaction. May cause chemical skin burns. May cause chemical gastrointestinal burns. May cause allergic respiratory reaction.
PAGE 12
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person. Get immediate medical attention. SECTION 5: FIRE FIGHTING MEASURES 5.1 FLAMMABLE PROPERTIES >= 200 ºF [Test Method: Closed Cup] No Data Available No Data Available Flash Point Flammable Limits(LEL) Flammable Limits(UEL) 5.2 EXTINGUISHING MEDIA Ordinary combustible material.
PAGE 13
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 7.1 HANDLING Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Contents may be under pressure, open carefully. Avoid breathing of vapors, mists or spray. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits. If ventilation is not adequate, use respiratory protection equipment. 7.2 STORAGE Store away from acids.
PAGE 14
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 DIMETHYLAMINOMONOMETHYL)PHEN OL * Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption.
PAGE 15
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 Substance Condition Amine Compounds Carbon monoxide Carbon dioxide Oxides of Nitrogen During Combustion During Combustion During Combustion During Combustion SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components. SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined.
PAGE 16
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 Ingredient C.A.S. No. Classification CARBON BLACK 1333-86-4 **Carcinogen ** WARNING: contains a chemical which can cause cancer. CHEMICAL INVENTORIES The components of this product are in compliance with the chemical notification requirements of TSCA. Contact 3M for more information. INTERNATIONAL REGULATIONS Contact 3M for more information. This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.
PAGE 17
MATERIAL SAFETY DATA SHEET SCOTCHCAST RESIN 4 PART B 01/05/12 3M USA MSDSs are available at www.3M.