MSDS

MATERIAL SAFETY DATA SHEET 3M(TM) Neoprene Contact Adhesive Spray 80 (UK7805) 02/29/2008
_________________________________________________________________________________________________
Page 5 of 8
TOLUENE ACGIH TWA 20 ppm Table A4
TOLUENE CMRG STEL 75 ppm Skin Notation*
TOLUENE OSHA TWA, Vacated 100 ppm
TOLUENE OSHA STEL, Vacated 150 ppm
TOLUENE OSHA TWA 200 ppm Table Z-2
TOLUENE OSHA CEIL 300 ppm Table Z-2
* Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye,
either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption.
VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local
regulatory agency.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Odor, Color, Grade:
clear, sweet fruity odor
General Physical Form:
Gas
Autoignition temperature
No Data Available
Flash Point
-50 ºF [Test Method: Tagliabue Closed Cup]
Flammable Limits - LEL
No Data Available
Flammable Limits - UEL
No Data Available
Vapor Density
2.97 [Ref Std: AIR=1]
Specific Gravity
0.827 [Ref Std: WATER=1]
pH
No Data Available
Melting point
No Data Available
Solubility in Water
Nil
Evaporation rate
1.90 [Ref Std: ETHER=1]
Hazardous Air Pollutants
<=.5 % weight [Test Method: Calculated]
Volatile Organic Compounds
Approximately 55 % [Test Method: calculated SCAQMD rule
443.1]
Percent volatile
Approximately 86 % weight
Viscosity
Not Applicable
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Heat
Hazardous Polymerization: Hazardous polymerization will not occur.