BROCHURE
3M
TM
Half and Full Facepiece
Respirators 7000 Series, Ultimate
Reusable are NIOSH approved to
accommodate a wide variety of
cartridges and filters. These
respirators are both made with
silicone to provide maximum
comfort and durability. The half
and full facepieces are each
available in 3 sizes (small,
medium, large) to comfortably
fit many faces.
3M
TM
Half Facepiece Respirator
7500, Ultimate Reusable
• Valve design helps make
breathing easier, and helps
reduce heat and moisture
buildup in facepiece.
• Advanced silicone material
provides a softer feel on
the face.
• Unique head harness design
adjusts easily and user has
the option of wearing the
respirator in either traditional
or drop-down mode.
3M
TM
Full Facepiece Respirator
7800S, Ultimate Reusable
• Available in many configurations
ranging from negative pressure
air purifying to SCBA. Excellent
choice for standardizing your
entire facility’s respiratory
requirements.
• Extra-large inhalation and
exhalation valves help make
breathing easier.
• Double-flange faceseal and
six adjustable straps help
provide a secure fit.
Half and Full Facepiece Respirators 7000 Series,
Ultimate Reusable
4018
page 1 of 3
3
3M
TM
Half and Full Facepiece Respirators 7000 Series,
Ultimate Reusable
Issue Date 01/01/04
These respirators help reduce exposure
to certain airborne contaminants. Misuse
may result in sickness or death. Before
use, the wearer must read and understand
User Instructions provided as a part of
product packaging. Time use limitations
may apply. Call 3M OH&ESD Technical
Service at 1-800-243-4630. In Canada,
call 1-800-267-4414.
Important
Before using these respirators, you must
determine the following:
1. The type of contaminant(s) for which
the respirator is being selected.
2. The concentration level of contaminant(s).
3. Whether the respirator can be properly
fitted on the wearer’s face. All respirator
instructions, warnings and use and time
limitations must also be read and
understood by the wearer before use.
Before use of these respirators, a written
respiratory protection program must be
implemented, meeting all the requirements
of OSHA 29 CFR 1910.134, including
training, medical evaluation and fit testing.