Datasheet

2 of 2

Typical Properties

Properties Typical Value

Adhesive Thermosetting Silicone

Backing Polyimide film

Backing thickness

1.0 mil (0.025 mm)

Total thickness

3.0 mils (0.076 mm)

Insulation Resistance

(megohms) >1 x 10

Dielectric Breakdown

7,500 Volts

Breaking Strength

30 lbs/in (53N/10mm)

Elongation

(% at break) 55%

Electrolytic Corrosion Factor

1.0

Adhesion to steel

25 oz/in (2.8N/10mm)

UL510 Flame Retarded

Yes

Printable Yes

1 Test Method ASTM-D-1000

2 UL recognized for flame retardancy per UL510, Product Category OANZ2, File E17385.

3 3M Test Method - available upon request

Note: Typical properties are not recommended for specification purposes. Product specifications will be

provided upon request

3M is a trademark of 3M Company.

Kapton is a trademark of E.I. du Pont de Nemours and Company.

Important Notice

ll statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,

but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for

your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are

not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect

unless expressly agreed upon, in writing, by an authorized ofﬁcer of 3M.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one

(1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty

period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of

the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss

or damage arising from this 3M product, regardless of the legal theory asserted.

Electrical Markets Division

6801 River Place Blvd.

Austin, TX 78726-9000 Litho in USA