Datasheet

1 of 2
Electrical Tape 92
Polyimide Film Tape with
Thermosetting Silicone Adhesive
Data Sheet
Product Description
3M
™
Electrical Tape 92 is a 1-mil polyimide
film backing with silicone adhesive.
• 1-mil polyimide Kapton
™
backing
• Silicone Adhesive
• High temperature applications to
180ºC
• UL510 Flame Retarded
Like all 3M insulated tapes, 92 Tape is
available in standard and custom widths and
lengths. Standard length is 36 yards.
• Widths from ¼” to 23”
• Longer lengths up to several times
normal length, dependent upon width.
Check with Customer Service.
Applications
3M Electrical Tape 92 is used for high
temperature electrical applications in which a
tough, thin insulating material is required for
wrapping coils, transformers, capacitors, and
wire harnesses. It is also used in printed
circuit board assembly as a wave solder
masking tape.
UL Component Recognition
UL Recognized Flame Retarded per UL510.
UL File Number E17385, Guide OANX2.
Underwriters Laboratories (UL) Recognized
products are evaluated for use as components
of end-product equipment that is Listed or
Classified by UL. To achieve Underwriters
laboratories Recognition, component
construction must meet UL specifications and
conditions of acceptability for proper and
save use of the component or products.