User Manual

ManualsBrands3M ManualsCarton Sealing Machines3M-Matic 7000r3 Pro Random Case Sealer, Top & Bottom Drive, 2-3" AccuGlide 3 Tape Head

NA - ENG

April 2016

3M-Matic

™

7000r-7000r3 Pro

Page 24

7. Hold taping head Bu ng Roller and

cut and remove cable tie that holds

applying/bu ng arms retracted

(Applying/bu ng rollers are held

retracted for shipment - Figure 7-6).

Allow bu ng/applying arms to

extend slowly.

Also cut and remove cable tie at

rear of lower taping head.

8. Check for free action of both upper

and lower taping heads. Push

bu ng roller into head to check for

free, smooth action of taping heads.

9. Ensure that the tape drum bracket

assembly, located on the lower

taping head, is mounted straight

down (Figure 7-8). The tape drum

bracket assembly can be pivoted

to provide tape roll clearance in

certain cases.

• To reduce the risk associated with

sharp blade hazards:

- Keep hands and  ngers away from

tape cuto blades under orange blade

guards. The blades are extremely

sharp.

WARNING

Figure 7-7 7000r-7000r3 Pro Frame Set-Up

Bu ng

Roller

Cable

Tie

C

Note:

Column Guads are

removed before Installing

the Bumper Supports.

Column Guards are

then installed.

B

A

7. Installation (continued)

Column Guards