User Manual

NA - ENG
April 2016
3M-Matic
™
7000r-7000r3 Pro
Page 14
4.1 Power Requirements:
Electrical: 115 VAC, 60 Hz, 6.4 A , 1/4 hp (720 watts)
Pneumatic: 90PSIG [6.2 bar], 11.6 SCFM [1200 NL/Min] Peak Usage.
The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord
and a grounded plug. Contact your 3M Representative for power requirements not
listed above.
4.2 Operating Rate:
Belt speed is 0.5m/s [100 F.P.M.]
Actual production rate is dependent on operator’s dexterity.
Boxes must be 18 inches (457mm) apart minimum.
4.3 Operating Conditions
Use in dry, relatively clean environments at 5
o
C to 50
o
C [40
o
F to 120
o
F] with clean,
dry boxes.
Note: Machine should not be washed or subjected to conditions causing moisture
condensation on components.
4.4 Tape
Scotch
®
pressure-sensitive  lm box sealing tapes.
• To reduce the risk associated with  re and
explosion hazards:
− Do not operate this equipment in potentially
 ammable or explosive environments.
WARNING
4. Speci cations