Specification Sheet
ASK A 3M EXPERT
June, 2015
Tartan™ Utility Filament Tape 8934
Technical Information Note
Typical Physical Properties
Typical Performance Characteristics
Product Description
Tartan™ Filament Tape 8934 is a glass lament reinforced tape for light duty strapping, bundling and
reinforcing. It has a synthetic rubber resin adhesive with good adhesion to most berboard surfaces, and a
variety of plastics and metal surfaces.
Product Features
• Abrasion and moisture resistant.
• High tensile strength.
• Allows printing and illustrations to be seen through the tape.
• Good shear and initial adhesion.
• Good aging.
• Protection of laments and adhesive to provide longer package life.
• Less tape needed at lower cost for applications where high tensile strength is a main requirement.
• Good holding under wide range of application conditions with minimum amount of tape.
• Holds with minimum rub-down.
• Boxes remain closed for long period of time.
The following technical information and data should be considered representative or typical only and should not be used for specication purposes.
Property Values Method
Backing Color Clear
Total Tape Thickness 0.102 mm 4 mil ASTM D3652
Backing Polypropylene lm
Adhesive Pressure sensitive synthetic rubber-
resin
Reinforcement Glass Yarn
Peel Adhesion
5.3 N/cm 53 N/100mm 48 oz/in
Property: Peel Adhesion
Method: ASTM D3330
Substrate: Stainless Steel
Tensile Strength
175.1 N/cm 1,751 N/100mm 100 lb/in
Property: Tensile Strength
Method: ASTM D3759
Elongation at Break: 3 %
Methods
ASTM D3759