Specification Sheet

3M
™
Particulate Welding
Respirator, 8515/07189(AAD),
N95
Key Features
• NIOSH approved N95 rating
• Adjustable M-noseclip
• Braided headbands
• Flame resistant per modified ASTM
D2859
• Cool Flow
™
Exhalation Valve
Material Composition
• Straps – Braided Polyisoprene
• Staples – Steel (Cadmium Free)
• Nose Clip – Aluminum
• Filter – Polypropylene
• Shell – Polyester, Flame Retardant
• Valve – Polypropylene & Polyisoprene
• This respirator contains no components
made from natural rubber latex
• Approximate weight of product: 0.55 oz
Country of Origin
Made in the USA.
Use For
• Use for solid particulates and liquid mists
in concentrations not exceeding 10X
PEL/OEL
• Use for certain metal fumes from
welding, brazing, cutting, and heating
of metals.
• Always follow
User Instructions and use
in manners as indicated
Do Not Use For
• DO NOT use for gases and vapors, oil
aerosols, asbestos, arsenic, cadmium,
lead, 4,4-methylene dianiline (MDA), or
abrasive blasting
• DO NOT use for particulate
concentrations exceeding 10X PEL/OEL
• DO NOT use in any manner not indicated
in the
User Instructions
Approvals and Standards
• NIOSH approved N95 particulate
respirator
• Meets NIOSH 42 CFR 84 N95
requirements for a minimum 95%
filtration efficiency against solid and
liquid aerosols that do not contain oil.
• NIOSH approval number: TC-84A-1299
• Assigned Protection Factor (APF 10) per
US OSHA and Canada CSA
Ordering Information
Description UPC ID #
Respirators/
Box
Boxes/Case Each/Case
Particulate
Respirator
8515
50051131071891 70-0708-9002-8 10 8 80