Cut Sheet

6000 SERIES HALF MASK RESPIRATORS 05/21/14
__________________________________________________________________________________________
Page 1 of 2
Article Information Letter
Copyright,2014,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group:
07-4066-2
Version Number:
1.00
Issue Date:
05/21/14
Supercedes Date:
Initial Issue
Product identifier
6000 SERIES HALF MASK RESPIRATORS
Product Identification Numbers
70-0703-1553-9, 70-0703-1554-7, 70-0703-1555-4, 70-0703-1738-6, 70-0703-1739-4, 70-0703-1740-2, 70-0704-0755-9, 70-
0704-0756-7, 70-0704-0757-5
Recommended use
Respiratory Protection
Supplier's details
MANUFACTURER: 3M
DIVISION: Personal Safety Division
ADDRESS: 3M Center, St. Paul, MN 55144-1000, USA
Telephone: 1-888-3M HELPS (1-888-364-3577)
Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
This Article Information Letter is provided as a courtesy in response to a customer request. A Safety Data Sheet (SDS) has
not been prepared for these product(s) because they are articles. Articles are not subject to the Occupational Safety and Health
Administrations Hazard Communication Standard (29 CFR 1910.1200(b)(6)(v)). As defined in this standard: Article
means a manufactured item other than a fluid or particle: (i) which is formed to a specific shape or design during
manufacture; (ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and
(iii) which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a
hazardous chemical, and does not pose a physical or health risk to employees.
This product, when used under reasonable conditions and in accordance with the directions for use, should not present a
health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use
may affect the performance of the product and may present potential health and safety hazards.
DISCLAIMER: The information in this Article Information Letter (AIL) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and
application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or
application.

Summary of content (2 pages)