MATERIAL SAFETY DATA SHEET QUICK-TERM II COLD SHRINK HI-K TERMINATION KIT 5621K 05/06/11 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved.
MATERIAL SAFETY DATA SHEET QUICK-TERM II COLD SHRINK HI-K TERMINATION KIT 5621K 05/06/11 Company Logo was deleted. Copyright was deleted. Kit: Manufacturer's name was deleted. Kit: Emergency phone information was deleted. Kit: Disclaimer (first paragraph) was deleted. Kit: Disclaimer (second paragraph) was deleted. Kit: Address line 1 was deleted. Kit: Address line 2 was deleted. DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued.
MATERIAL SAFETY DATA SHEET SILICONE LUBRICANT 08/01/12 Material Safety Data Sheet Copyright, 2012, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
MATERIAL SAFETY DATA SHEET SILICONE LUBRICANT 08/01/12 Contact with the skin during product use is not expected to result in significant irritation. Inhalation: No health effects are expected. Ingestion: No health effects are expected. SECTION 4: FIRST AID MEASURES 4.1 FIRST AID PROCEDURES The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed. Eye Contact: Flush eyes with large amounts of water.
MATERIAL SAFETY DATA SHEET SILICONE LUBRICANT 08/01/12 Clean-up methods Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more information on handling and managing the spill. Collect as much of the spilled material as possible. Clean up residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and follow safety precautions on the solvent label and MSDS.
MATERIAL SAFETY DATA SHEET SILICONE LUBRICANT 08/01/12 Specific Physical Form: Odor, Color, Grade: General Physical Form: Autoignition temperature Flash Point Flammable Limits(LEL) Flammable Limits(UEL) Boiling Point Density Vapor Density GREASE Light colored grease, no odor Solid grease No Data Available Flash point > 93 °C (200 °F) No Data Available No Data Available Not Applicable No Data Available Not Applicable Vapor Pressure Not Applicable Specific Gravity pH Melting point 1.02 - 1.
MATERIAL SAFETY DATA SHEET SILICONE LUBRICANT 08/01/12 SECTION 12: ECOLOGICAL INFORMATION ECOTOXICOLOGICAL INFORMATION Not determined. CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: For quantities <100 lbs. (50kg): dispose of waste product in a sanitary landfill. For larger quantities: incinerate in an industrial or commercial facility in the presence of a combustible material.
MATERIAL SAFETY DATA SHEET SILICONE LUBRICANT 08/01/12 SECTION 16: OTHER INFORMATION NFPA Hazard Classification Health: 0 Flammability: 1 Reactivity: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies.
MATERIAL SAFETY DATA SHEET SILICONE LUBRICANT 08/01/12 Section 2: Ingredient table was modified. Section 4: First aid for ingestion (swallowing) - none - was added. Section 6: 6.2. Environmental precautions heading was added. Section 6: 6.1. Personal precautions, protective equipment and emergency procedures heading was added. Section 10.1 Conditions to avoid heading was added. Section 10.2 Materials to avoid heading was added. Section 16: Web address was added.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE 12/13/12 Material Safety Data Sheet Copyright, 2012, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE 12/13/12 Odor, Color, Grade: Yellow, syrup-like, sweet petroleum odor General Physical Form: Liquid Immediate health, physical, and environmental hazards: Flammable liquid and vapor. Closed containers exposed to heat from fire may build pressure and explode. Extremely flammable liquid and vapor. Contact with aluminum or zinc in a pressurized system may generate hydrogen gas which could create an explosion hazard.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE 12/13/12 Carcinogenicity: Contains a chemical or chemicals which can cause cancer. Ingredient ETHYLBENZENE 3.3 C.A.S. No. 100-41-4 Class Description Grp. 2B: Possible human carc. Regulation International Agency for Research on Cancer POTENTIAL ENVIRONMENTAL EFFECTS Maximum Volatile Organic Compound (VOC) content is 565 grams/liter. Maximum VOC minus Water minus Exempt Solvents = 565 grams/liter. SECTION 4: FIRST AID MEASURES 4.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE 12/13/12 SECTION 6: ACCIDENTAL RELEASE MEASURES 6.1. Personal precautions, protective equipment and emergency procedures Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up by qualified personnel. Remove all ignition sources such as flames, smoking materials, and electrical spark sources. Use only non-sparking tools. Ventilate the area with fresh air.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE 12/13/12 8.2.1 Eye/Face Protection Avoid eye contact with vapors, mists, or spray. The following eye protection(s) are recommended: Indirect Vented Goggles . 8.2.2 Skin Protection Avoid skin contact. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE TOLUENE OSHA 12/13/12 CEIL 300 ppm * Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE 12/13/12 Hazardous Polymerization: Hazardous polymerization will not occur. Hazardous Decomposition or By-Products Substance Condition Hydrocarbons Carbon monoxide Carbon dioxide Not Specified Oxidative Degradation During Combustion SECTION 11: TOXICOLOGICAL INFORMATION Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE Fire Hazard - Yes Pressure Hazard - No 12/13/12 Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA): Ingredient C.A.S. No % by Wt TOLUENE HEXANE CYCLOHEXANE ETHYLBENZENE 108-88-3 110-54-3 110-82-7 100-41-4 5 - 10 5 - 15 0.1 - 2 < 0.5 STATE REGULATIONS Contact 3M for more information.
MATERIAL SAFETY DATA SHEET NRS RUBBER ADHESIVE 12/13/12 Section 9: Property description for optional properties was modified. Section 9: Specific gravity information was modified. Section 9: Solubility in water text was modified. Section 8: Respiratory protection - recommended respirators guide was modified. Section 9: Flash point information was modified. Section 2: Ingredient table was modified. Section 15: EPCRA 313 information was modified.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 Material Safety Data Sheet Copyright, 2011, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 Eye Contact: Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing. Skin Contact: Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 5.3 PROTECTION OF FIRE FIGHTERS Special Fire Fighting Procedures: Water may not effectively extinguish fire; however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture. Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA). Unusual Fire and Explosion Hazards: Combustible liquid and vapor.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 Use with appropriate local exhaust ventilation. Provide local exhaust ventilation at transfer points. Use in an enclosed process area is recommended. If exhaust ventilation is not available, use appropriate respiratory protection. Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 Flash Point Flash Point Flammable Limits(LEL) Flammable Limits(UEL) Boiling Point 165 ºF [Test Method: Open Cup] 144 ºF [Test Method: Closed Cup] No Data Available No Data Available 380 ºF - 480 ºF Vapor Density > 1 [Ref Std: AIR=1] Vapor Pressure < 1 mmHg [@ 25 ºC] Specific Gravity pH Melting point 0.76 7.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 CHEMICAL FATE INFORMATION Not determined. SECTION 13: DISPOSAL CONSIDERATIONS Waste Disposal Method: Incinerate in an industrial or commercial facility. As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste. EPA Hazardous Waste Number (RCRA): Not regulated Since regulations vary, consult applicable regulations or authorities before disposal.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 NFPA Hazard Classification Health: 2 Flammability: 2 Reactivity: 0 Special Hazards: None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies.
MATERIAL SAFETY DATA SHEET CC-2 Kit CABLE CLEANING PAD COMPONENT 05/06/11 OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of use or application.
