Brochure

3M
™
Water Filtration Products High Flow Series can meet the filtration needs of an entire foodservice establish-
ment or address specific applications one at a time. A one-cartridge High Flow system with revolutionary Integrated
Membrane Pre-Activated Carbon Technology (“IMPACT”) media delivers Recipe Quality Water™ at a flow rate
of up to 5 gallons per minute (18.9 lpm) and accomplishes what was previously the job of a three- or four-cartridge
system. No activation steps are required, and, for most water, no pre-filter is needed. Whether your foodservice appli-
cation is cold beverages, ice machines, coffee, tea, espresso, or any combination, a 3M Water Filtration Products
High Flow Series system is the one you should count on for unprecedented cyst and bacteria reduction, sediment
holding, chlorine taste and odor reduction, and scale inhibition.
*Measured with E.coli.
Economy
• Single-cartridge flow rates and capacities previously available only with
three- or four-cartridge systems.
• Up to 12 month cartridge life for cartridges with Integrated Membrane Pre-Activated
Carbon Technology (“IMPACT”) media.
• No need for a separate prefilter.
Ease
• Fast and easy cartridge change-outs with SQC — Sanitary Quick Change —
encapsulated cartridge design.
• No requirement for pre-activation of the media.
• Direct or easily-adaptable connections to existing plumbing lines with NPT
horizontal inlet and outlet ports.
Certifi cation
• FDA CFR-21 and/or NSF Standard 42 compliant materials.
• Certification to NSF Standard 53 for cyst reduction and reduction of 99.99 percent
of water-borne bacteria* when using 3M Water Filtration Products nylon-membrane
cartridge filters.
• No exposure to contaminated media.
Performance
• Recipe Quality Water for all commercial foodservice applications, including cold
beverages, ice and all brewed beverages.
• Combined sediment, cyst, water-borne bacteria and scale reduction with chlo-
rine taste and odor reduction in a single cartridge from our innovative Integrated
Membrane Pre-Activated Carbon Technology (“IMPACT”) media.
• Reduction of sediment and abrasive hard particles helps to extend the life of pumps,
valves, o-rings, and seals.
• Compact manifold systems to simultaneously service multiple applications.
2
Provides
High Flow Series
The