Submittal Sheet

3M
™
Water Filtration Products
SPEC#
QUANTITY
application:
ICE
models:
ICE140-S/ICE145-S
PRODUCT BENEFITS
PRODUCT SPECIFICATIONS
3M
™
Water Filtration Products Models ICE140-S and ICE145-S single cartridge water
fi ltration systems help provide consistent high quality water for commercial ice by re-
ducing the effects of sediment, chlorine taste and odor and scale at fl ow rates up to 2.1
gpm (7.9 lpm). Built-in scale inhibition reduces the ability of calcium and magnesium to
precipitate on the evaporator plates as hard scale.
• ICE140-S combines chlorine taste and odor reduction with cyst, bacteria
1
and sedi-
ment reduction, while reducing the effects of chlorine corrosion and scale for up to
25,000 gallons (94,635 liters).
• ICE145-S combines chlorine taste and odor reduction with sediment reduction from
higher turbidity water, while reducing the effects of chlorine corrosion and scale for
up to 25,000 gallons (94,635 liters).
• Effectively reduces sediment and chlorine taste and odor for better equipment protec-
tion and clearer, great tasting ice.
• Revolutionary Integrated Membrane Pre-Activated Carbon Technology (“IMPACT”)
dual-zone media cartridge construction combines a membrane in series with pre-
mium activated carbon to provide superior throughput and cartridge life.
• Certifi ed by NSF to Standard 53 for cyst reduction (HF40-S replacement cartridge).
• Built-in bacteria inhibitor intended to reduce fouling of media (HF40-S replacement
cartridge).
• NSF Standard 42 and/or FDA CFR-21 compliant materials.
• Reduction of up to 99.99% of common water-borne heterotrophic bacteria by mem-
brane fi ltration as tested by CUNO (HF40-S replacement cartridge).
• Valve-in-head design simultaneously shuts off and vents water, allowing for simple
and virtually trouble-free cartridge change-outs without the need to shut off the
upstream feed water.
• Built-in scale inhibitor reduces lime scale build-up on evaporator plates as tested by
CUNO.
• Sanitary Quick Change (SQC) encapsulated cartridge design allows for fast and easy
cartridge change-outs with a 1/4 turn.
• 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections
to existing plumbing lines.
1
As tested with either E.Coli ATCC (11229) or Pseudomonas (B) diminuta ATCC (19146)
2
Tested and verifi ed by manufacturer’s laboratory
Model
Number
Part
Number
Reduction
Claims
Nominal
Micron
Rating
Capacity
Service
Flow Rate
Application
Replacement
Cartridge
Sizing
ICE140-S 56162-03
Cyst, Bacteria
1
,
Sediment, Chlorine
Taste and Odor, Scale
2
0.2
2
25,000 gallons
(94,635 liters)
2.1 gpm
(7.9 lpm)
Most
Standard
Water
HF40-S:
56133-05
Low Flow Cubers to 1,000 lbs. (454 kg)
High Flow Cubers to 600 lbs. (272 kg)
Flakers to 1,800 lbs. (816 kg)
ICE145-S 56162-04
Sediment, Chlorine
Taste and Odor, Scale
2
3.0
25,000 gallons
(94,635 liters)
2.1 gpm
(7.9 lpm)
Higher
Turbidity
Water
HF45-S:
56133-09
Low Flow Cubers to 1,000 lbs. (454 kg)
High Flow Cubers to 600 lbs. (272 kg)
Flakers to 1,800 lbs. (816 kg)