Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET 3M(TM) Adhesion Promoter 4298 and 3M(TM) Adhesion Promoter 06396 05/12/11
_________________________________________________________________________________________________
Page 5 of 8
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
CYCLOHEXANE ACGIH TWA 100 ppm
CYCLOHEXANE OSHA TWA 1050 mg/m3
ETHYL ACETATE ACGIH TWA 400 ppm
ETHYL ACETATE OSHA TWA 1400 mg/m3
ETHYL ALCOHOL ACGIH STEL 1000 ppm
ETHYL ALCOHOL OSHA TWA 1900 mg/m3
ETHYLBENZENE ACGIH TWA 100 ppm
ETHYLBENZENE ACGIH STEL 125 ppm
ETHYLBENZENE CMRG TWA 25 ppm
ETHYLBENZENE CMRG STEL 75 ppm
ETHYLBENZENE OSHA TWA 435 mg/m3
ISOPROPYL ALCOHOL ACGIH TWA 200 ppm
ISOPROPYL ALCOHOL ACGIH STEL 400 ppm
ISOPROPYL ALCOHOL OSHA TWA 980 mg/m3
METHYL ALCOHOL ACGIH TWA 200 ppm Skin Notation*
METHYL ALCOHOL ACGIH STEL 250 ppm Skin Notation*
METHYL ALCOHOL OSHA TWA 260 mg/m3
TOLUENE ACGIH TWA 20 ppm
TOLUENE CMRG STEL 75 ppm Skin Notation*
TOLUENE OSHA TWA 200 ppm
TOLUENE OSHA CEIL 300 ppm
XYLENE ACGIH TWA 100 ppm
XYLENE ACGIH STEL 150 ppm
XYLENE CMRG TWA 50 ppm
XYLENE CMRG STEL 75 ppm
XYLENE OSHA TWA 435 mg/m3
* Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous membrane and eye,
either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form:
Sponge holding approximately 2 milliliters of liquid.
Odor, Color, Grade:
Liquid: yellow, solvent odor, absorbed onto a sponge. Physical
properties reflect the liquid only.
General Physical Form:
Liquid
Autoignition temperature
430 ºC
Flash Point
34 ºF [Test Method: SETAFLASH]
Flammable Limits(LEL)
1 % [Test Method: Estimated]
Flammable Limits(UEL)
6 % [Test Method: Estimated]
Boiling Point
>=170 ºF [Test Method: Estimated] [Details: (initial)]
Density
8.2 lb/gal
Vapor Density
1.7 [Test Method: Estimated] [Ref Std: AIR=1]
Vapor Pressure
122 mmHg [@ 20 ºC]