Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET 3M(TM) Adhesion Promoter 4298 and 3M(TM) Adhesion Promoter 06396 05/12/11
_________________________________________________________________________________________________
Page 4 of 8
Refer to other sections of this MSDS for information regarding physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information on handling and managing the spill.
Collect as much of the spilled material as possible using non-sparking tools. Seal the container.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Keep away from heat,
sparks, open flame, pilot lights and other sources of ignition. Ground containers securely when transferring contents. Wear low static
or properly grounded shoes. Avoid breathing of vapors, mists or spray. Avoid static discharge. Avoid eye contact with vapors, mists,
or spray. For industrial or professional use only. Do not breathe vapors. Avoid contact with oxidizing agents.
7.2 STORAGE
Store away from acids. Store away from heat. Store out of direct sunlight. Keep container in well-ventilated area. Keep container
tightly closed. Store away from oxidizing agents.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use in an enclosed process area is recommended. Use in a well-ventilated area. Use general dilution ventilation and/or local exhaust
ventilation to control airborne exposures to below Occupational Exposure Limits and/or control mist, vapor, or spray. If ventilation is
not adequate, use respiratory protection equipment.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields
.
8.2.2 Skin Protection
Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Fluoroelastomer
Polymer laminate
.
8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray. Do not breathe vapors.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges
. Select and use respiratory protection to prevent an inhalation exposure based on the results of an exposure assessment. Consult with
your respirator manufacturer for selection of appropriate types of respirators.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Do not ingest.