Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET 3M(TM) Adhesion Promoter 4298 and 3M(TM) Adhesion Promoter 06396 05/12/11
_________________________________________________________________________________________________
Page 1 of 8
Material Safety Data Sheet
Copyright, 2011, 3M Company All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME:
3M(TM) Adhesion Promoter 4298 and 3M(TM) Adhesion Promoter 06396
MANUFACTURER:
3M
DIVISION:
Automotive Aftermarket
Automotive Aftermarket
ADDRESS:
3M Center, St. Paul, MN 55144-1000
EMERGENCY PHONE: [phone] or [phone] (24 hours)
Issue Date:
05/12/11
Supercedes Date:
05/10/11
Document Group:
19-6313-1
Product Use:
Intended Use: Adhesion promoter for use with attachment tapes.
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
CYCLOHEXANE 110-82-7 40 - 50
XYLENE 1330-20-7 30 - 40
ETHYLBENZENE 100-41-4 0 - 11
ETHYL ALCOHOL 64-17-5 5 - 10
ACRYLATE POLYMER (NJTSRN 04499600-5984P) Trade Secret 1 - 5
CHLORINATED RUBBER 68609-36-9 1 - 5
ETHYL ACETATE 141-78-6 1 - 5
ISOPROPYL ALCOHOL 67-63-0 < 1
METHYL ALCOHOL 67-56-1 < 0.5
4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN POLYMER 25068-38-6 < 0.5
TOLUENE 108-88-3 < 0.3
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Sponge holding approximately 2 milliliters of liquid.
Odor, Color, Grade: Liquid: yellow, solvent odor, absorbed onto a sponge. Physical properties reflect the liquid only.